Frézy válcové čelní krátké, 2 břity ke středu, 40°, typ N, ploška weldon
Popis produktu
Frézy válcové čelní krátké, 2 břity ke středu, typ N, ploška weldon, vyrobené z rychlořezné oceli HSS Co8, dle normy DIN 844K, vhodné na šlichtování, drážkování a hrubování, pro obrábění ocelí, litiny a slitin chromu.
|
D
k 10 |
d
h 6 | l1 | l2 | Z | Kód zboží | Cena/ks | Skladem | Počet ks | |
|---|---|---|---|---|---|---|---|---|---|
| 2 | 6 | 51 | 7 | 3 | 140618.020 | 291,- Kč 247,- Kč | Ano |
|
|
| 2,5 | 6 | 52 | 8 | 3 | 140618.025 | 291,- Kč 247,- Kč | Ano |
|
|
| 3 | 6 | 52 | 8 | 4 | 140618.030 | 267,- Kč 227,- Kč | Ano |
|
|
| 3,5 | 6 | 54 | 10 | 4 | 140618.035 | 291,- Kč 247,- Kč | Ano |
|
|
| 4 | 6 | 55 | 11 | 4 | 140618.040 | 267,- Kč 227,- Kč | Ano |
|
|
| 4,5 | 6 | 55 | 11 | 4 | 140618.045 | 302,- Kč 257,- Kč | Ano |
|
|
| 5 | 6 | 57 | 13 | 4 | 140618.050 | 267,- Kč 227,- Kč | Ano |
|
|
| 5,5 | 6 | 57 | 13 | 4 | 140618.055 | 302,- Kč 257,- Kč | Ano |
|
|
| 6 | 6 | 57 | 13 | 4 | 140618.060 | 285,- Kč 242,- Kč | Ne |
|
|
| 6,5 | 10 | 66 | 16 | 4 | 140618.065 | 392,- Kč 333,- Kč | Ano |
|
|
| 7 | 10 | 66 | 16 | 4 | 140618.070 | 339,- Kč 288,- Kč | Ne |
|
|
| 7,5 | 10 | 66 | 16 | 4 | 140618.075 | 409,- Kč 348,- Kč | Ano |
|
|
| 8 | 10 | 69 | 19 | 4 | 140618.080 | 348,- Kč 296,- Kč | Ano |
|
|
| 8,5 | 10 | 69 | 19 | 4 | 140618.085 | 461,- Kč 392,- Kč | Ano |
|
|
| 9 | 10 | 69 | 19 | 4 | 140618.090 | 411,- Kč 349,- Kč | Ano |
|
|
| 9,5 | 10 | 69 | 19 | 4 | 140618.095 | 463,- Kč 394,- Kč | Ano |
|
|
| 10 | 10 | 72 | 22 | 4 | 140618.100 | 411,- Kč 349,- Kč | Ano |
|
|
| 11 | 12 | 79 | 22 | 4 | 140618.110 | 512,- Kč 435,- Kč | Ano |
|
|
| 12 | 12 | 83 | 26 | 4 | 140618.120 | 488,- Kč 415,- Kč | Ano |
|
|
| 13 | 12 | 83 | 26 | 4 | 140618.130 | 594,- Kč 505,- Kč | Ano |
|
|
| 14 | 12 | 83 | 26 | 4 | 140618.140 | 572,- Kč 486,- Kč | Ne |
|
|
| 15 | 12 | 83 | 26 | 4 | 140618.150 | 706,- Kč 600,- Kč | Ano |
|
|
| 16 | 16 | 92 | 32 | 4 | 140618.160 | 680,- Kč 578,- Kč | Ano |
|
|
| 17 | 16 | 92 | 32 | 4 | 140618.170 | 889,- Kč 756,- Kč | Ano |
|
|
| 18 | 16 | 92 | 32 | 4 | 140618.180 | 842,- Kč 716,- Kč | Ano |
|
|
| 19 | 16 | 92 | 32 | 4 | 140618.190 | 1 067,- Kč 907,- Kč | Ano |
|
|
| 20 | 20 | 104 | 38 | 4 | 140618.200 | 1 048,- Kč 891,- Kč | Ano |
|
|
| 22 | 20 | 104 | 38 | 4 | 140618.220 | 1 378,- Kč 1 171,- Kč | Ano |
|
|
| 24 | 25 | 121 | 45 | 5 | 140618.240 | 1 821,- Kč 1 548,- Kč | Ano |
|
|
| 25 | 25 | 121 | 45 | 5 | 140618.250 | 1 839,- Kč 1 563,- Kč | Ano |
|
|
| 28 | 25 | 121 | 45 | 5 | 140618.280 | 2 156,- Kč 1 833,- Kč | Ano |
|
|
| 30 | 25 | 121 | 46 | 5 | 140618.300 | 2 309,- Kč 1 963,- Kč | Ano |
|
|
| 32 | 32 | 133 | 53 | 6 | 140618.320 | 2 507,- Kč 2 131,- Kč | Ano |
|
Řezné podmínky
Materiál |
Pevnost |
Ap |
Ae |
Vc |
fz(mm/z) Ø 3 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 18 |
Ø 20 |
Ø 25 |
Ø 32 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P.1 | Automatové a konstrukční oceli | ≤ 600 N/mm² | 1xD | 0,1xD | 45 | 0.006 | 0.015 | 0.021 | 0.028 | 0.034 | 0.044 | 0.051 | 0.057 | 0.071 | 0.091 |
| P.2 | Konstrukční a lité oceli | ≤ 850 N/mm² | 1xD | 0,1xD | 39 | 0.006 | 0.015 | 0.021 | 0.028 | 0.034 | 0.044 | 0.051 | 0.057 | 0.071 | 0.091 |
| P.3 | Nástrojové oceli nízkolegované | ≤ 1100 N/mm² | 1xD | 0,1xD | 24 | 0.006 | 0.015 | 0.021 | 0.028 | 0.034 | 0.044 | 0.051 | 0.057 | 0.071 | 0.091 |
| P.4 | Zušlechtěné oceli | ≤ 900 N/mm² | 1xD | 0,1xD | 30 | 0.006 | 0.015 | 0.021 | 0.028 | 0.034 | 0.044 | 0.051 | 0.057 | 0.071 | 0.091 |
| P.5 | Nástrojové oceli vysocelegované | ≤ 1100 N/mm² | 1xD | 0,1xD | 24 | 0.006 | 0.015 | 0.021 | 0.028 | 0.034 | 0.044 | 0.051 | 0.057 | 0.071 | 0.091 |
| K.1 | Litina (≤ 240 HB) | ≤ 820 N/mm² | 1xD | 0,1xD | 35 | 0.006 | 0.015 | 0.021 | 0.028 | 0.034 | 0.044 | 0.051 | 0.057 | 0.071 | 0.091 |
| N.4 | Měď, slitiny mědi, mosaz, bronz | ≤ 800 N/mm² | 1xD | 0,1xD | 80-120 | 0.006 | 0.015 | 0.021 | 0.028 | 0.034 | 0.044 | 0.051 | 0.057 | 0.071 | 0.091 |
| S.1 | Slitiny Cr-Ni | ≤ 1500 N/mm² | 1xD | 0,1xD | 12 | 0.0042 | 0.0105 | 0.0147 | 0.0196 | 0.0238 | 0.0308 | 0.0357 | 0.0399 | 0.0497 | 0.0637 |
Vlastnosti produktu
Válcová stopka s ploškou (Weldon) dle DIN 1835 B.
Úhel šroubovice = 40°, úhel čela = 12°
Vysoce výkonná ocel s dobrou houževnatostí a výbornou teplotní odolností. Vhodná především pro frézování vysoce pevných materiálů, austenitických ocelí, ocelí pro tváření za tepla atd.
Univerzální použití. Vhodné pro materiály do pevnosti 900 Mpa.
