Spiralbohrer mit Zylinderschaft, standard
D | l1 | l2 | Artikel Nr. | Preis/St. | Auf Lager | Stückzahl | |
---|---|---|---|---|---|---|---|
3 | 61 | 33 | VN10018.0300 | 2,30 € | Ja |
|
|
3,2 | 65 | 36 | VN10018.0320 | 2,40 € | Ja |
|
|
3,3 | 65 | 36 | VN10018.0330 | 2,40 € | Nein |
|
|
3,5 | 70 | 39 | VN10018.0350 | 2,40 € | Ja |
|
|
4 | 75 | 43 | VN10018.0400 | 2,50 € | Ja |
|
|
4,2 | 75 | 43 | VN10018.0420 | 3,30 € | Ja |
|
|
4,5 | 80 | 47 | VN10018.0450 | 3,30 € | Ja |
|
|
5 | 86 | 52 | VN10018.0500 | 3,10 € | Ja |
|
|
5,1 | 86 | 52 | VN10018.0510 | 4,10 € | Ja |
|
|
5,2 | 86 | 52 | VN10018.0520 | 4,10 € | Nein |
|
|
5,5 | 93 | 57 | VN10018.0550 | 4,30 € | Ja |
|
|
6 | 93 | 57 | VN10018.0600 | 4,00 € | Ja |
|
|
6,5 | 101 | 63 | VN10018.0650 | 4,60 € | Ja |
|
|
6,8 | 109 | 69 | VN10018.0680 | 5,50 € | Ja |
|
|
7 | 109 | 69 | VN10018.0700 | 4,80 € | Ja |
|
|
7,5 | 109 | 69 | VN10018.0750 | 5,70 € | Ja |
|
|
8 | 117 | 75 | VN10018.0800 | 6,30 € | Ja |
|
|
8,5 | 117 | 75 | VN10018.0850 | 6,30 € | Nein |
|
|
9 | 125 | 81 | VN10018.0900 | 8,80 € | Ja |
|
|
9,5 | 125 | 81 | VN10018.0950 | 10,70 € | Ja |
|
|
10 | 133 | 87 | VN10018.1000 | 9,00 € | Ja |
|
|
10,5 | 133 | 87 | VN10018.1050 | 13,40 € | Ja |
|
|
11 | 142 | 94 | VN10018.1100 | 20,90 € | Ja |
|
|
11,5 | 142 | 94 | VN10018.1150 | 21,50 € | Ja |
|
|
12 | 151 | 101 | VN10018.1200 | 22,00 € | Ja |
|
|
12,5 | 151 | 101 | VN10018.1250 | 28,00 € | Nein |
|
|
13 | 151 | 101 | VN10018.1300 | 27,30 € | Ja |
|
|
13,5 | 160 | 108 | VN10018.1350 | 43,00 € | Ja |
|
|
14 | 160 | 108 | VN10018.1400 | 35,60 € | Ja |
|
|
14,5 | 169 | 114 | VN10018.1450 | 49,40 € | Ja |
|
|
15 | 169 | 114 | VN10018.1500 | 52,80 € | Ja |
|
|
16 | 178 | 120 | VN10018.1600 | 57,20 € | Ja |
|
Schnittbedingungen
Material |
Festigkeit |
Vc |
fz(mm/r) Ø1 |
Ø2 |
Ø3,15 |
Ø4 |
Ø5 |
Ø6,3 |
Ø8 |
Ø10 |
Ø12,5 |
Ø16 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
P.1 | Automatenstähle, allgemeine Baustähle | ≤ 600 N/mm² | 40 | 0,016 | 0,05 | 0,08 | 0,1 | 0,1 | 0,125 | 0,16 | 0,2 | 0,2 | 0,25 |
P.2 | Allgemine Baustähle, Stahlguss | ≤ 850 N/mm² | 40 | 0,016 | 0,05 | 0,08 | 0,1 | 0,1 | 0,125 | 0,16 | 0,2 | 0,2 | 0,25 |
P.4 | Vergütungsstähle | ≤ 900 N/mm² | 20 | 0,014 | 0,04 | 0,063 | 0,08 | 0,08 | 0,1 | 0,125 | 0,16 | 0,16 | 0,2 |
M.1 | Rost- und säurebeständige | ≤ 750 N/mm² | 18 | 0,014 | 0,04 | 0,063 | 0,08 | 0,08 | 0,1 | 0,125 | 0,16 | 0,1 | 0,2 |
M.2 | Rost- und säurebeständige | 750 - 850 N/mm² | 14 | 0,012 | 0,032 | 0,05 | 0,063 | 0,063 | 0,08 | 0,1 | 0,125 | 0,125 | 0,2 |
M.3 | Rost- und säurebeständige | > 850 N/mm² | 16 | 0,012 | 0,032 | 0,05 | 0,063 | 0,063 | 0,08 | 0,1 | 0,125 | 0,125 | 0,16 |
K.1 | Temperguss (≤ 240 HB) | ≤ 820 N/mm² | 35 | 0,018 | 0,063 | 0,1 | 0,125 | 0,125 | 0,16 | 0,2 | 0,25 | 0,25 | 0,315 |
K.2 | Temperguss (> 240 HB) | > 800 N/mm² | 30 | 0,018 | 0,063 | 0,1 | 0,125 | 0,125 | 0,16 | 0,2 | 0,25 | 0,25 | 0,315 |
N.4 | Kupfer-Zink-Legierungen | ≤ 800 N/mm² | 35 | 0,014 | 0,04 | 0,063 | 0,08 | 0,08 | 0,1 | 0,125 | 0,16 | 0,16 | 0,2 |
Produkteingeschaften
Normal Nutprofil, normal Kern, Spitzenwinkel 118°. HSS Co Bohrer mässig verdickt Kern, Spitzenwinkel 130°.
Kagelmantelschiff mit Kreuzanschiff, DIN 1412 Form C.

Bohrtiefe 5xD
Der Hochleistungsschnellstahl mit guter Zähigkeit und einwandfreier Warmebeständigkeit. Vorallem für das Fräsen von hochfesten Materialien, austenitischen Stählen, Stählen für Warmverformung u.s.w. geeignet.