310340 High-speed steel HSS DIN 851
Clamping element
Type N
Tool geometry
Cutting edges on the face and perimeter of the side and face cutter
Feed direction possibility
Material HSS
D
h 12
MK S
h 12
l1 l3 d1 Z a Item code On stock
18 1 8 82 25 8 8 10 310340.180 Yes
21 2 9 102 33 10 8 12 310340.210 Yes
25 2 11 104 35 12 8 14 310340.250 Yes
32 2 14 111 42 16 8 18 310340.320 Yes
40 3 18 138 52 20 8 22 310340.400 No
50 4 22 173 64 25 8 28 310340.500 Yes
60 4 28 188 79 31 10 36 310340.600 Yes
72 5 35 229 93 36 10 42 310340.720 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 18

Ø 21

Ø 25

Ø 32

Ø 40

Ø 50

Ø 60

Ø 72
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 0,1xS D-d1 28 0.014 0.017 0.028 0.036 0.042 0.05 0.057 0.065
P.2 | General construction steels, steel castings ≤ 850 N/mm² 0,1xS D-d1 24 0.014 0.017 0.028 0.036 0.042 0.05 0.057 0.065
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 0,1xS D-d1 18 0.014 0.017 0.028 0.036 0.042 0.05 0.057 0.065
N.2 | Aluminium cast alloys Si (Si ≤ 12%) ≤ 600 N/mm² 0,1xS D-d1 36 0.018 0.022 0.036 0.047 0.055 0.065 0.074 0.085
S.2 | Titanium, titanium alloys ≤ 1250 N/mm² 0,1xS D-d1 9 0.01 0.012 0.02 0.025 0.029 0.035 0.04 0.046

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Morse taper shank according to DIN 228 A.
Tool geometry

Tool geometry

more +
Helix angle = 10°. Rake angle = 10°.
Feed direction possibility

Feed direction possibility

Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Cutting edges on the face and perimeter of the side and face cutter

Cutting edges on the face and perimeter of the side and face cutter

Material HSS

Material HSS

more +
High speed steel of average performance, it is applicable especially for cutters of smaller diameters and for milling of materials up to the strength of 900 MPa.