End mills extra long, fine teeth, 50°-35°, type H, Weldon shank
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 20 |
---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 2xD | 0,06xD | 210 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 2xD | 0,06xD | 175 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
P.5 | Tool steels high alloyed | ≤ 1100 N/mm² | 2xD | 0,06xD | 120 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
K.1 | Cast iron | < 240 HB | 2xD | 0,06xD | 150 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
K.2 | Cast iron | > 240 HB | 2xD | 0,06xD | 110 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 2xD | 0,06xD | 50 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
H.1 | Hardened materials | < 54 HRC | 2xD | 0,06xD | 120 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
H.2 | Hardened materials | 54 - 60 HRC | 2xD | 0,06xD | 100 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
Type H
more +Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.
Feed direction possibility
Oil coolant.
AlCrN coating
more +Coating with very high wear resistance and excellent hot hardness.