End mills long with corner radius, 2 teeth cut to centre, 40°-42°, type N, plain shank, coating AlCr
D
h 10 |
d
h 6 | l1 | l2 | l3 | Dn | R | Z | Item code | On stock |
---|---|---|---|---|---|---|---|---|---|
6 | 6 | 57 | 13 | 19 | 5,7 | 0,5 | 4 | S151602R.06005 AlCr | No |
6 | 6 | 57 | 13 | 19 | 5,7 | 1 | 4 | S151602R.06010 AlCr | No |
8 | 8 | 63 | 19 | 25 | 7,6 | 0,5 | 4 | S151602R.08005 AlCr | No |
8 | 8 | 63 | 19 | 25 | 7,6 | 1 | 4 | S151602R.08010 AlCr | No |
10 | 10 | 72 | 22 | 30 | 9,5 | 0,5 | 4 | S151602R.10005 AlCr | No |
10 | 10 | 72 | 22 | 30 | 9,5 | 1 | 4 | S151602R.10010 AlCr | No |
10 | 10 | 72 | 22 | 30 | 9,5 | 2 | 4 | S151602R.10020 AlCr | No |
12 | 12 | 83 | 26 | 36 | 11,5 | 0,5 | 4 | S151602R.12005 AlCr | No |
12 | 12 | 83 | 26 | 36 | 11,5 | 1 | 4 | S151602R.12010 AlCr | No |
12 | 12 | 83 | 26 | 36 | 11,5 | 2 | 4 | S151602R.12020 AlCr | No |
16 | 16 | 92 | 32 | 42 | 15,5 | 0,5 | 4 | S151602R.16005 AlCr | No |
16 | 16 | 92 | 32 | 42 | 15,5 | 1 | 4 | S151602R.16010 AlCr | No |
16 | 16 | 92 | 32 | 42 | 15,5 | 2 | 4 | S151602R.16020 AlCr | No |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
---|---|---|---|---|---|---|---|---|---|
M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² | 1,5xD | 0,3xD | 120 | 0.15 | 0.15 | 0.2 | 0.2 | 0.25 |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 1,5xD | 0,3xD | 100 | 0.15 | 0.15 | 0.2 | 0.2 | 0.25 |
S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 1,5xD | 0,3xD | 70 | 0.15 | 0.15 | 0.2 | 0.2 | 0.25 |
S.2 | Titanium, titanium alloys | ≤ 1250 N/mm² | 1,5xD | 0,3xD | 90 | 0.15 | 0.15 | 0.2 | 0.2 | 0.25 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Plain straight shank according to DIN 6535 HA.
Tool geometry
more +Helix angle = 40/42°.
Rake angle = 12°.
End face design - radius
Solid carbide
more +Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
Type N
more +Universal usage. Suitable for materials up to strength 900 MPa.