End mills short for trochoidal milling, λ 37°/30°, type CB, plain shank, code S122502T, diameter 8 mm, corner radius 0,5 mm, coating AlCrN
D | d | l1 | l2 | l3 | Dn | R | Z | Item code | On stock |
---|---|---|---|---|---|---|---|---|---|
8 | 8 | 63 | 16 | 25 | 7,6 | 0,5 | 5 | S122502T.08005 ALCRN | No |
Cutting conditions
Materiál |
Pevnost |
Ap |
Ae |
Vc |
fz(mm/z) Ø 3 |
Ø 4 |
Ø 5 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 20 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
P.1 | Automatové a konstrukční oceli | ≤ 600 N/mm² | 2xD | 0.15xD | 300 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
P.3 | Nástrojové oceli nízkolegované | ≤ 1100 N/mm² | 2xD | 0.15xD | 250 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
P.5 | Nástrojové oceli vysocelegované | ≤ 1100 N/mm² | 2xD | 0.15xD | 210 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
P.6 | Nástrojové a zušlechtěné oceli | > 1100 N/mm² | 2xD | 0.15xD | 210 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
K.1 | Litina (≤ 240 HB) | ≤ 820 N/mm² | 2xD | 0.15xD | 250 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
H.1 | Kalené oceli (< 54 HRC) | ≤ 1920 N/mm² | 2xD | 0.15xD | 100 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
H.2 | Kalené oceli (< 54 HRC) | 1920-2210 N/mm² | 2xD | 0.15xD | 90 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
Výpočty řezných podmínek
Product attributes
Clamping element
more +Plain straight shank according to DIN 6535 HA.
Type T
more +Trochoidal milling.
Feed direction possibility
End face design - radius
Solid carbide
more +Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.