End mills short with corner radius, fine teeth, λ 50°, type H, plain shank, code S151702R, diameter 5 mm, corner radius 0,3 mm, coating TiSiN
D | d | l1 | l2 | l3 | Dn | R | Z | Item code | On stock |
---|---|---|---|---|---|---|---|---|---|
5 | 6 | 57 | 13 | 18 | 4,8 | 0,3 | 6 | S151702R.050 TISIN | Yes |
Cutting conditions
Materiál |
Pevnosť |
Ap |
Ae |
Vc |
fz(mm/z) Ø 3 |
Ø 4 |
Ø 5 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 20 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
H.1 | Hardened materials (< 54 HRC) | ≤ 1920 N/mm² | 1xD | 0.2xD | 220 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 | 0.12 | 0.16 | 0.2 |
H.2 | Hardened materials (54 - 60 HRC) | 1920-2210 N/mm² | 1xD | 0.2xD | 190 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 | 0.12 | 0.16 | 0.2 |
H.3 | Hardened materials (> 60 HRC) | > 2210 N/mm² | 1xD | 0.2xD | 160 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 | 0.12 | 0.16 | 0.2 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Plain straight shank according to DIN 6535 HA.
Tool geometry
more +Helix angle = 50°.
Rake angle = 10°.
End face design - radius
Povlak TiSiN
more +Coating with excellent hardness, high heat and oxidation resistance.It is usually applied to high-speed cutting tools used on CNC machines for machining hardened steels from 50 to 65 HRC.
Type H
more +Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.
Feed direction possibility
Solid carbide
more +Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.