161418 TiAlN High-speed steel HSS Co8
Clamping element
Type N
Tool geometry
Feed direction possibility
Feed direction possibilityD<3
Material HSS Co8
TiAlN coating.
D
e 8
d
h 6
l1 l2 Z Item code On stock
2 6 38 7 3 161418.020 TiAlN No
3 6 39 8 3 161418.030 TiAlN Yes
4 6 42 11 3 161418.040 TiAlN Yes
5 6 44 13 3 161418.050 TiAlN Yes
6 6 44 13 3 161418.060 TiAlN Yes
7 8 48 16 3 161418.070 TiAlN No
8 8 51 19 3 161418.080 TiAlN Yes
10 10 59 22 3 161418.100 TiAlN Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 3

Ø 5

Ø 6

Ø 8

Ø 10
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1xD 0,1xD 67,5 0.0108 0.018 0.0216 0.0288 0.036
P.2 | General construction steels, steel castings ≤ 850 N/mm² 1xD 0,1xD 58,5 0.0099 0.0165 0.0198 0.0264 0.033
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1xD 0,1xD 36 0.0081 0.0135 0.0162 0.0216 0.027
P.4 | Heat treatable steels ≤ 900 N/mm² 1xD 0,1xD 45 0.0081 0.0135 0.0162 0.0216 0.027
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 1xD 0,1xD 36 0.0081 0.0135 0.0162 0.0216 0.027
P.6 | Tool and treated steels > 1100 N/mm² 1xD 0,1xD 30 0.0081 0.0135 0.0162 0.0216 0.027
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 1xD 0,1xD 22,5 0.009 0.015 0.018 0.024 0.03
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 1xD 0,1xD 52,5 0.0108 0.018 0.0216 0.0288 0.036
K.2 | Cast iron (> 240 HB) > 800 N/mm² 1xD 0,1xD 37,5 0.0099 0.0165 0.0198 0.0265 0.033

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Tool geometry

Tool geometry

more +
Helix angle = 30°. Rake angle = 12°.
Feed direction possibility

Feed direction possibility

TiAlN coating.

TiAlN coating.

more +
Its advantage is in high hardness in higher temperaures, good oxidation resistance and low temperature conductivity. Universal usage with emphasis on high-speed miling without cooling. Siutable for milling of hard materials.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility

Material HSS Co8

Material HSS Co8

more +
Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with high strength, austenitic steels, steels for warm working, etc.