Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN
D
e 8 |
d
h 6 | l1 | l2 | Z | Item code | On stock |
---|---|---|---|---|---|---|
1,8 | 6 | 51 | 7 | 3 | 231418.018 TiAlN | No |
2 | 6 | 51 | 7 | 3 | 231418.020 TiAlN | No |
2,8 | 6 | 52 | 8 | 3 | 231418.028 TiAlN | Yes |
3 | 6 | 52 | 8 | 3 | 231418.030 TiAlN | Yes |
4 | 6 | 55 | 11 | 3 | 231418.040 TiAlN | Yes |
4,8 | 6 | 57 | 13 | 3 | 231418.048 TiAlN | No |
5 | 6 | 57 | 13 | 3 | 231418.050 TiAlN | Yes |
6 | 6 | 57 | 13 | 3 | 231418.060 TiAlN | Yes |
6,75* | 10 | 66 | 16 | 3 | 231418.0675 TiAlN | No |
7 | 10 | 66 | 16 | 3 | 231418.070 TiAlN | Yes |
8 | 10 | 69 | 19 | 3 | 231418.080 TiAlN | Yes |
9 | 10 | 69 | 19 | 3 | 231418.090 TiAlN | Yes |
10 | 10 | 72 | 22 | 3 | 231418.100 TiAlN | Yes |
11 | 10 | 79 | 22 | 3 | 231418.110 TiAlN | Yes |
12 | 12 | 83 | 26 | 3 | 231418.120 TiAlN | Yes |
13 | 12 | 83 | 26 | 3 | 231418.130 TiAlN | Yes |
14 | 12 | 83 | 26 | 3 | 231418.140 TiAlN | No |
15 | 12 | 83 | 26 | 3 | 231418.150 TiAlN | Yes |
16 | 16 | 92 | 32 | 3 | 231418.160 TiAlN | Yes |
18 | 16 | 92 | 32 | 3 | 231418.180 TiAlN | Yes |
20 | 20 | 104 | 36 | 3 | 231418.200 TiAlN | No |
22 | 20 | 104 | 38 | 3 | 231418.220 TiAlN | Yes |
24 | 25 | 121 | 45 | 3 | 231418.240 TiAlN | Yes |
25 | 25 | 121 | 45 | 3 | 231418.250 TiAlN | Yes |
*) On demand
Cutting conditions
Material |
Strength |
Ae |
Ap |
Vc |
fz(mm/z) Ø 3 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 18 |
Ø 20 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 0,5xD | 1xD | 67.5 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 |
P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 0,5xD | 1xD | 58.5 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 0,5xD | 1xD | 36 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 |
P.4 | Tool steels low alloyed | ≤ 900 N/mm² | 0,5xD | 1xD | 45 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 0,5xD | 1xD | 22.5 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 |
K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² | 0,5xD | 1xD | 52.5 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 |
K.2 | Cast iron (> 240 HB) | > 800 N/mm² | 0,5xD | 1xD | 37.5 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 |
S.2 | Titanium, Titanium alloys | ≤ 1250 N/mm² | 0,5xD | 1xD | 18 | 0.0063 | 0.0154 | 0.0203 | 0.0252 | 0.0308 | 0.0406 | 0.0455 | 0.0511 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Tool geometry
more +Helix angle = 30°.
Rake angle = 12°.
Material HSS Co8
more +Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with high strength, austenitic steels, steels for warm working, etc.
Type N
more +Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility
TiAlN coating.
more +Its advantage is in high hardness in higher temperaures, good oxidation resistance and low temperature conductivity. Universal usage with emphasis on high-speed miling without cooling. Siutable for milling of hard materials.