Straight shank twist drills, jobbers series, 5xD, type N, code S10012, diameter 3,3 mm, coating TiAlN
D | l1 | l2 | Item code | On stock |
---|---|---|---|---|
3,3 | 66 | 28 | S10012.033 TIALN | Yes |
Cutting conditions
Material |
Strenght |
Vc |
fz(mm/r) Ø1 |
Ø2 |
Ø3,15 |
Ø4 |
Ø5 |
Ø6,3 |
Ø8 |
Ø10 |
Ø12,5 |
Ø16 |
Ø20 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² |
75 |
0,02 | 0,08 | 0,125 | 0,16 | 0,16 | 0,2 | 0,25 | 0,315 | 0,312 | 0,4 | 0,5 |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 65 | 0,02 | 0,08 | 0,125 | 0,16 | 0,16 | 0,2 | 0,25 | 0,315 | 0,312 | 0,4 | 0,5 |
P.6 | Tool and treated steels | > 1100 N/mm² | 50 | 0,02 | 0,08 | 0,125 | 0,16 | 0,16 | 0,2 | 0,25 | 0,315 | 0,312 | 0,4 | 0,5 |
M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² | 33 | 0,008 | 0,025 | 0,04 | 0,05 | 0,05 | 0,063 | 0,25 | 0,1 | 0,1 | 0,125 | 0,16 |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 25 | 0,008 | 0,025 | 0,04 | 0,05 | 0,05 | 0,063 | 0,08 | 0,1 | 0,1 | 0,125 | 0,16 |
K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² (≤ 240 HB) | 60 | 0,02 | 0,08 | 0,125 | 0,16 | 0,16 | 0,2 | 0,25 | 0,315 | 0,312 | 0,4 | 0,5 |
K.2 | Cast iron (> 240 HB) | ≤ 820 N/mm² (> 240 HB) | 60 | 0,02 | 0,08 | 0,125 | 0,16 | 0,16 | 0,2 | 0,25 | 0,315 | 0,312 | 0,4 | 0,5 |
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm2 | 150 | 0,02 | 0,08 | 0,125 | 0,16 | 0,16 | 0,2 | 0,25 | 0,315 | 0,312 | 0,4 | 0,5 |
N.3 | Aluminium cast alloys Si (Si > 12%) | ≤ 600 N/mm² | 150 | 0,02 | 0,08 | 0,125 | 0,16 | 0,16 | 0,2 | 0,25 | 0,315 | 0,312 | 0,4 | 0,5 |
S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 35 | 0,014 | 0,04 | 0,063 | 0,08 | 0,08 | 0,1 | 0,125 | 0,16 | 0,16 | 0,2 | 0,25 |
S.2 | Titanium, Titanium alloys | ≤ 1250 N/mm² | 25 | 0,014 | 0,04 | 0,063 | 0,08 | 0,08 | 0,1 | 0,125 | 0,16 | 0,16 | 0,2 | 0,25 |
H.1 | Hardened materials (< 54 HRC) | ≤ 1920 N/mm² | 25 | 0,006 | 0,02 | 0,032 | 0,04 | 0,04 | 0,05 | 0,063 | 0,08 | 0,08 | 0,1 | 0,125 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Plain straight shank according to DIN 6535 HA.
Drilling depth 5xD
TiAlN coating.
more +Its advantage is in high hardness in higher temperaures, good oxidation resistance and low temperature conductivity. Universal usage with emphasis on high-speed miling without cooling. Siutable for milling of hard materials.
Point angle 140°
Solid carbide
more +Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.