End mills long, 2 teeth cut to centre, 20°, typ HR, plain shank, code S109602, diameter 10 mm
D
h 10 |
d
h 6 | l1 | l2 | Z | Item code | On stock |
---|---|---|---|---|---|---|
10 | 10 | 72 | 22 | 4 | S109602.100 AlTiN | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 18 |
Ø 20 |
---|---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 1xD | 0,4xD | 180 | 0.015 | 0.02 | 0.025 | 0.03 | 0.04 | 0.045 | 0.05 |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 1xD | 0,4xD | 100 | 0.015 | 0.02 | 0.025 | 0.03 | 0.04 | 0.045 | 0.05 |
P.5 | Tool steels high alloyed | ≤ 1100 N/mm² | 1xD | 0,4xD | 80 | 0.015 | 0.02 | 0.025 | 0.03 | 0.04 | 0.045 | 0.05 |
K.1 | Cast iron (≤ 240 HB) | < 240 HB | 1xD | 0,4xD | 140 | 0.015 | 0.02 | 0.025 | 0.03 | 0.04 | 0.045 | 0.05 |
K.2 | Cast iron (> 240 HB) | > 240 HB | 1xD | 0,4xD | 100 | 0.015 | 0.02 | 0.025 | 0.03 | 0.04 | 0.045 | 0.05 |
S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 1xD | 0,4xD | 50 | 0.015 | 0.02 | 0.025 | 0.03 | 0.04 | 0.045 | 0.05 |
S.2 | Titanium, titanium alloys | ≤ 1250 N/mm² | 1xD | 0,4xD | 70 | 0.015 | 0.02 | 0.025 | 0.03 | 0.04 | 0.045 | 0.05 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Plain straight shank according to DIN 6535 HA.
Tool geometry
more +Helix angle = 20°.
Rake angle = 8°.
End face design
Solid carbide
more +Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
Type HR
more +For roughing operation and materials of medium and higher strength (up to 1200 MPa), surface roughness Ra 6,3 and more.
Feed direction possibility
Oil coolant.
Coating AlTiN
more +Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.