End mills short, semicoarse teeth, type N, Morse taper shank, code 422245, diameter 14 mm
D
k 10 | MK | l1 | l2 | Z | Item code | On stock |
---|---|---|---|---|---|---|
14 | 2 | 111 | 26 | 4 | 422245.140 | No |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 10 |
Ø 16 |
Ø 20 |
Ø 25 |
Ø 32 |
Ø 40 |
Ø 50 |
Ø 63 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 1xD | 0,5xD | 37,5 | 0.035 | 0.07 | 0.09 | 0.1 | 0.12 | 0.13 | 0.137 | 0.142 |
P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 1xD | 0,5xD | 32,5 | 0.035 | 0.07 | 0.09 | 0.1 | 0.12 | 0.13 | 0.137 | 0.142 |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 1xD | 0,5xD | 18 | 0.035 | 0.07 | 0.09 | 0.1 | 0.12 | 0.13 | 0.137 | 0.142 |
P.4 | Heat treatable steels | ≤ 900 N/mm² | 1xD | 0,5xD | 25 | 0.035 | 0.07 | 0.09 | 0.1 | 0.12 | 0.13 | 0.137 | 0.142 |
P.5 | Tool steels high alloyed | ≤ 1100 N/mm² | 1xD | 0,5xD | 18 | 0.035 | 0.07 | 0.09 | 0.1 | 0.12 | 0.13 | 0.137 | 0.142 |
P.6 | Tool and treated steels | > 1100 N/mm² | 1xD | 0,5xD | 16 | 0.025 | 0.049 | 0.063 | 0.07 | 0.084 | 0.091 | 0.096 | 0.099 |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 1xD | 0,5xD | 10 | 0.035 | 0.07 | 0.09 | 0.1 | 0.12 | 0.13 | 0.137 | 0.142 |
K.2 | Cast iron (> 240 HB) | > 800 N/mm² | 1xD | 0,5xD | 22 | 0.035 | 0.07 | 0.09 | 0.1 | 0.12 | 0.13 | 0.137 | 0.142 |
S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 1xD | 0,5xD | 8 | 0.025 | 0.049 | 0.063 | 0.07 | 0.084 | 0.091 | 0.096 | 0.099 |
Calculations of cutting conditions