VN50115 High-speed steel HSS Co5
Type N
Tool geometry
Point shape - form N
Point angle 120°
Right helix
Material HSS Co5
D l1 l2 Item code On stock
3 46 12 VN50115.0300 Yes
4 55 12 VN50115.0400 Yes
5 62 14 VN50115.0500 Yes
6 66 16 VN50115.0600 Yes
8 79 21 VN50115.0800 Yes
10 89 25 VN50115.1000 Yes
12 102 30 VN50115.1200 Yes
14 107 34 VN50115.1400 No
16 115 38 VN50115.1600 Yes
20 131 45 VN50115.2000 Yes

Cutting conditions


Material

Strength

Vc
fz(mm/r)
Ø1

Ø2

Ø3,15

Ø4

Ø5

Ø6,3

Ø8

Ø10

Ø12,5
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 40 0,016 0,05 0,08 0,1 0,1 0,125 0,16 0,2 0,2
P.2 | General construction steels, steel castings ≤ 850 N/mm² 40 0,016 0,05 0,08 0,1 0,1 0,125 0,16 0,2 0,2
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 35 0,016 0,05 0,08 0,1 0,1 0,125 0,16 0,2 0,2
P.4 | Heat treatable steels ≤ 900 N/mm2 22 0,014 0,04 0,063 0,08 0,08 0,1 0,125 0,16 0,16
M.1 | Corrosion- and acid-proof steels ≤ 750 N/mm² 12 0,012 0,032 0,05 0,063 0,063 0,08 0,1 0,125 0,125
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 10 0,012 0,032 0,05 0,063 0,063 0,08 0,1 0,125 0,125
M.3 | Corrosion- and acid-proof steels > 850 N/mm² 10 0,012 0,032 0,05 0,063 0,063 0,08 0,1 0,125 0,125
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 33 0,018 0,063 0,1 0,125 0,125 0,16 0,2 0,25 0,25
K.2 | Cast iron (> 240 HB) > 800 N/mm² 30 0,018 0,063 0,1 0,125 0,125 0,16 0,2 0,25 0,25
S.1 | Chrome-nickel alloysi ≤ 1500 N/mm² 6 0,006 0,02 0,032 0,04 0,04 0,05 0,063 0,08 0,08

Calculations of cutting conditions

Product attributes

Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Point shape - form N

Point shape - form N

more +
Conical lip relief, DIN 1412 form N.
Right helix

Right helix

Tool geometry

Tool geometry

more +
Lead of helix 20°.
Point angle 120°

Point angle 120°

Material HSS Co5

Material HSS Co5

more +
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.