Corner rounding concave cutters, Weldon shank
R
H 11 |
D
js 15 | D3 |
d
h 6 | l1 | Z | Item code | On stock |
---|---|---|---|---|---|---|---|
1 | 8 | 6 | 10 | 60 | 4 | 360018.010 | No |
1,25 | 8,5 | 6 | 10 | 60 | 4 | 360018.0125 | Yes |
1,5 | 9 | 6 | 10 | 60 | 4 | 360018.015 | Yes |
1,6 | 9,2 | 6 | 10 | 60 | 4 | 360018.016 | Yes |
2 | 10 | 6 | 10 | 60 | 4 | 360018.020 | Yes |
2,5 | 11 | 6 | 10 | 60 | 4 | 360018.025 | Yes |
3 | 12 | 6 | 12 | 60 | 4 | 360018.030 | No |
3,5 | 13 | 6 | 12 | 60 | 4 | 360018.035 | Yes |
4 | 14 | 6 | 12 | 60 | 4 | 360018.040 | Yes |
4,5 | 15 | 6 | 12 | 60 | 4 | 360018.045 | Yes |
5 | 16 | 6 | 12 | 60 | 4 | 360018.050 | No |
5,5 | 19 | 8 | 16 | 67 | 4 | 360018.055 | Yes |
6 | 20 | 8 | 16 | 67 | 4 | 360018.060 | No |
6,5 | 21 | 8 | 16 | 71 | 4 | 360018.065 | Yes |
7 | 22 | 8 | 16 | 71 | 4 | 360018.070 | Yes |
7,5 | 23 | 8 | 16 | 71 | 4 | 360018.075 | Yes |
8 | 24 | 8 | 16 | 71 | 4 | 360018.080 | No |
8,5 | 25 | 8 | 25 | 85 | 4 | 360018.085 | Yes |
9 | 26 | 8 | 25 | 85 | 4 | 360018.090 | Yes |
9,5 | 27 | 8 | 25 | 85 | 4 | 360018.095 | Yes |
10 | 28 | 8 | 25 | 85 | 4 | 360018.100 | No |
10,5 | 31 | 10 | 25 | 90 | 4 | 360018.105 | Yes |
11 | 32 | 10 | 25 | 90 | 4 | 360018.110 | Yes |
12 | 34 | 10 | 25 | 90 | 4 | 360018.120 | Yes |
12,5 | 41 | 16 | 25 | 100 | 6 | 360018.125 | Yes |
13 | 42 | 16 | 25 | 100 | 6 | 360018.130 | Yes |
14 | 44 | 16 | 25 | 100 | 6 | 360018.140 | Yes |
15 | 46 | 16 | 25 | 100 | 6 | 360018.150 | Yes |
16 | 48 | 16 | 25 | 100 | 6 | 360018.160 | Yes |
18 | 52 | 16 | 32 | 112 | 6 | 360018.180 | Yes |
19 | 56 | 18 | 32 | 112 | 6 | 360018.190 | Yes |
20 | 56 | 16 | 32 | 112 | 6 | 360018.200 | Yes |
25 | 72 | 22 | 32 | 118 | 6 | 360018.250 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) R1 |
R2 |
R3 |
R5 |
R6 |
R8,5 |
R10 |
R12 |
R13 |
R16 |
R20 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steel, general construction steels | ≤ 600 N/mm² | 1xR | 1xR | 30 | 0.013 | 0.017 | 0.02 | 0.031 | 0.036 | 0.042 | 0.047 | 0.057 | 0.07 | 0.08 | 0.094 |
P.2 | General construction steels, steel casting | ≤ 850 N/mm² | 1xR | 1xR | 25 | 0.013 | 0.017 | 0.02 | 0.031 | 0.036 | 0.042 | 0.047 | 0.057 | 0.07 | 0.08 | 0.094 |
P.3 | Tools steels low alloyed | ≤ 1100 N/mm² | 1xR | 1xR | 20 | 0.013 | 0.017 | 0.02 | 0.031 | 0.036 | 0.042 | 0.047 | 0.057 | 0.07 | 0.08 | 0.094 |
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1xR | 1xR | 40 | 0.017 | 0.022 | 0.026 | 0.04 | 0.047 | 0.054 | 0.061 | 0.074 | 0.091 | 0.104 | 0.122 |
S.2 | Titanium, titanium alloys | ≤ 1250 N/mm² | 1xR | 1xR | 11 | 0.009 | 0.012 | 0.014 | 0.022 | 0.025 | 0.029 | 0.033 | 0.04 | 0.049 | 0.056 | 0.066 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Straight shank with clamping flat (Weldon) according to DIN 1835 B.