End mills short, 45°, typ HR, weldon shank, code S118612N, diameter 16 mm
D
h 10 |
d
h 6 | l1 | l2 | l3 | Dn | Z | Item code | On stock |
---|---|---|---|---|---|---|---|---|
16 | 16 | 82 | 22 | 34 | 15,5 | 4 | S118612N.160 AlCrN | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 4 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 18 |
Ø 20 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 1xD | 0,4xD | 210 | 0.2 | 0.03 | 0.04 | 0.055 | 0.065 | 0.085 | 0.1 | 0.11 |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 1xD | 0,4xD | 175 | 0.2 | 0.03 | 0.04 | 0.055 | 0.065 | 0.085 | 0.1 | 0.11 |
P.5 | Tool steels high alloyed | ≤ 1100 N/mm² | 1xD | 0,4xD | 120 | 0.2 | 0.03 | 0.04 | 0.055 | 0.065 | 0.085 | 0.1 | 0.11 |
M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² | 1xD | 0,4xD | 110 | 0.2 | 0.03 | 0.04 | 0.055 | 0.065 | 0.085 | 0.1 | 0.11 |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 1xD | 0,4xD | 90 | 0.2 | 0.03 | 0.04 | 0.055 | 0.065 | 0.085 | 0.1 | 0.11 |
K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² | 1xD | 0,4xD | 150 | 0.2 | 0.03 | 0.04 | 0.055 | 0.065 | 0.085 | 0.1 | 0.11 |
K.2 | Cast iron (> 240 HB) | > 800 N/mm² | 1xD | 0,4xD | 110 | 0.2 | 0.03 | 0.04 | 0.055 | 0.065 | 0.085 | 0.1 | 0.11 |
S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 1xD | 0,4xD | 50 | 0.2 | 0.03 | 0.04 | 0.055 | 0.065 | 0.085 | 0.1 | 0.11 |
H.1 | Hardened materials (< 54 HRC) | < 1920 N/mm² | 1xD | 0,4xD | 120 | 0.2 | 0.03 | 0.04 | 0.055 | 0.065 | 0.085 | 0.1 | 0.11 |
H.2 | Hardened materials (54 - 60 HRC) | 1920 - 2210 N/mm² | 1xD | 0,4xD | 100 | 0.2 | 0.03 | 0.04 | 0.055 | 0.065 | 0.085 | 0.1 | 0.11 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
Tool geometry
more +Helix angle = 45°.
Rake angle = 6°.
End face design
Solid carbide
more +Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.