Woodruff keyseat cutters, plain shank
D
h 12 |
S
e 8 |
d
h 6 | l1 | Z | b | h | Item code | On stock |
---|---|---|---|---|---|---|---|---|
4,5 | 1 | 6 | 50 | 6 | 1 | 1,4 | 320005.045010 | No |
7,5 | 1,5 | 6 | 50 | 6 | 1,5 | 2,6 | 320005.075015 | Yes |
7,5 | 2 | 6 | 50 | 6 | 2 | 2,6 | 320005.075020 | Yes |
10,5 | 2 | 6 | 50 | 6 | 2 | 3,7 | 320005.105020 | Yes |
10,5 | 2,5 | 6 | 50 | 6 | 2,5 | 3,7 | 320005.105025 | Yes |
10,5 | 3 | 6 | 50 | 6 | 3 | 3,7 | 320005.105030 | Yes |
13,5* | 2 | 10 | 56 | 6 | 320005.135020 | Yes | ||
13,5 | 3 | 10 | 56 | 6 | 3 | 5 | 320005.135030 | Yes |
13,5 | 4 | 10 | 56 | 6 | 4 | 5 | 320005.135040 | Yes |
16,5 | 3 | 10 | 56 | 6 | 3 | 6,5 | 320005.165030 | Yes |
16,5 | 4 | 10 | 56 | 6 | 4 | 6,5 | 320005.165040 | Yes |
16,5 | 5 | 10 | 56 | 6 | 5 | 6,5 | 320005.165050 | Yes |
19,5* | 3 | 10 | 63 | 8 | 320005.195030 | No | ||
19,5 | 4 | 10 | 63 | 8 | 4 | 7,5 | 320005.195040 | Yes |
19,5 | 5 | 10 | 63 | 8 | 5 | 7,5 | 320005.195050 | Yes |
19,5 | 6 | 10 | 63 | 8 | 6 | 7,5 | 320005.195060 | Yes |
22,5* | 4 | 10 | 63 | 8 | 320005.225040 | Yes | ||
22,5 | 5 | 10 | 63 | 8 | 5 | 9 | 320005.225050 | No |
22,5 | 6 | 10 | 63 | 8 | 6 | 9 | 320005.225060 | Yes |
22,5 | 8 | 10 | 63 | 8 | 8 | 9 | 320005.225080 | Yes |
25,5* | 5 | 10 | 63 | 10 | 320005.255050 | Yes | ||
25,5 | 6 | 10 | 63 | 10 | 6 | 10 | 320005.255060 | Yes |
28,5 | 6 | 10 | 63 | 10 | 6 | 11 | 320005.285060 | Yes |
28,5 | 8 | 10 | 63 | 10 | 8 | 11 | 320005.285080 | Yes |
28,5 | 10 | 12 | 71 | 10 | 10 | 11 | 320005.285100 | Yes |
32,5 | 6 | 12 | 71 | 10 | 320005.325060 | Yes | ||
32,5 | 8 | 12 | 71 | 10 | 8 | 13 | 320005.325080 | Yes |
32,5 | 10 | 12 | 71 | 10 | 10 | 13 | 320005.325100 | Yes |
38,5* | 8 | 12 | 71 | 10 | 320005.385080 | Yes | ||
45,5* | 8 | 12 | 71 | 12 | 320005.455080 | Yes | ||
45,5 | 10 | 12 | 71 | 12 | 10 | 16 | 320005.455100 | Yes |
*) ≠ DIN 850, ≠ DIN 6888
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 4,5 |
Ø 7,5 |
Ø 10,5 |
Ø 13,5 |
Ø 16,5 |
Ø 19,5 |
Ø 22,5 |
Ø 25,5 |
Ø 28,5 |
Ø 32,5 |
Ø 45,5 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steel, general construction steels | ≤ 600 N/mm² | 1xS | t1 (DIN 6888) | 33 | 0.006 | 0.008 | 0.01 | 0.015 | 0.025 | 0.035 | 0.04 | 0.045 | 0.05 | 0.06 | 0.07 |
P.2 | General construction steels, steel casting | ≤ 850 N/mm² | 1xS | t1 (DIN 6888) | 28 | 0.006 | 0.008 | 0.01 | 0.015 | 0.025 | 0.035 | 0.04 | 0.045 | 0.05 | 0.06 | 0.07 |
P.3 | Tools steels low alloyed | ≤ 1100 N/mm² | 1xS | t1 (DIN 6888) | 22 | 0.006 | 0.008 | 0.01 | 0.015 | 0.025 | 0.035 | 0.04 | 0.045 | 0.05 | 0.06 | 0.07 |
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1xS | t1 (DIN 6888) | 45 | 0.08 | 0.01 | 0.013 | 0.02 | 0.033 | 0.046 | 0.052 | 0.059 | 0.065 | 0.078 | 0.091 |
S.2 | Titanium, titanium alloys | ≤ 1250 N/mm² | 1xS | t1 (DIN 6888) | 11 | 0.006 | 0.004 | 0.007 | 0.011 | 0.018 | 0.025 | 0.028 | 0.032 | 0.035 | 0.042 | 0.49 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Plain straight shank according to DIN 1835 A.
Design of cutting edge - straight teeth
Cutting edges on the perimeter of the side and face cutter.
Material HSS Co5
more +Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Tool geometry
more +Helix angle = 10°.
Rake angle = 10°.