Set of end mills short, 1 tooth cut over centre, 30°, type W, plain shank, 6 pcs, diameter 6 - 10 mm
Item code | On stock |
---|---|
100405.3-10 SET | Yes |
Content of set
Code | D | d | l1 | l2 | Z | 100405.01 SET |
100405.030 | 3 | 8 | 60 | 10 | 1 | • |
100405.040 | 4 | 8 | 60 | 12 | 1 | • |
100405.050 | 5 | 8 | 60 | 14 | 1 | • |
100405.060 | 6 | 8 | 60 | 14 | 1 | • |
100405.080 | 8 | 8 | 80 | 14 | 1 | • |
100405.100 | 10 | 8 | 80 | 14 | 1 | • |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 3 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
---|---|---|---|---|---|---|---|---|---|
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1,5xD | 0,5xD | 160-260 | 0.008 | 0.018 | 0.024 | 0.03 | 0.033 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Plain straight shank according to DIN 1835 A.
Tool geometry
more +Helix angle = 30°.
Rake angle = 20°.
Material HSS Co5
more +Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Type W
more +For machining of soft materials, for example aluminium and non-ferrous metals.