Woodruff keyseat cutters, plain shank
|
D
h 12 |
S
e 8 |
d
h 6 | l1 | Z | b | h | Item code | On stock |
|---|---|---|---|---|---|---|---|---|
| 4,5 | 1 | 6 | 50 | 6 | 1 | 1,4 | 320005.045010 | Yes |
| 7,5 | 1,5 | 6 | 50 | 6 | 1,5 | 2,6 | 320005.075015 | Yes |
| 7,5 | 2 | 6 | 50 | 6 | 2 | 2,6 | 320005.075020 | Yes |
| 10,5 | 2 | 6 | 50 | 6 | 2 | 3,7 | 320005.105020 | No |
| 10,5 | 2,5 | 6 | 50 | 6 | 2,5 | 3,7 | 320005.105025 | Yes |
| 10,5 | 3 | 6 | 50 | 6 | 3 | 3,7 | 320005.105030 | Yes |
| 13,5* | 2 | 10 | 56 | 6 | 320005.135020 | Yes | ||
| 13,5 | 3 | 10 | 56 | 6 | 3 | 5 | 320005.135030 | Yes |
| 13,5 | 4 | 10 | 56 | 6 | 4 | 5 | 320005.135040 | Yes |
| 16,5 | 3 | 10 | 56 | 6 | 3 | 6,5 | 320005.165030 | Yes |
| 16,5 | 4 | 10 | 56 | 6 | 4 | 6,5 | 320005.165040 | Yes |
| 16,5 | 5 | 10 | 56 | 6 | 5 | 6,5 | 320005.165050 | Yes |
| 19,5* | 3 | 10 | 63 | 8 | 320005.195030 | Yes | ||
| 19,5 | 4 | 10 | 63 | 8 | 4 | 7,5 | 320005.195040 | Yes |
| 19,5 | 5 | 10 | 63 | 8 | 5 | 7,5 | 320005.195050 | Yes |
| 19,5 | 6 | 10 | 63 | 8 | 6 | 7,5 | 320005.195060 | Yes |
| 22,5* | 4 | 10 | 63 | 8 | 320005.225040 | Yes | ||
| 22,5 | 5 | 10 | 63 | 8 | 5 | 9 | 320005.225050 | Yes |
| 22,5 | 6 | 10 | 63 | 8 | 6 | 9 | 320005.225060 | Yes |
| 22,5 | 8 | 10 | 63 | 8 | 8 | 9 | 320005.225080 | Yes |
| 25,5* | 5 | 10 | 63 | 10 | 320005.255050 | Yes | ||
| 25,5 | 6 | 10 | 63 | 10 | 6 | 10 | 320005.255060 | Yes |
| 28,5 | 6 | 10 | 63 | 10 | 6 | 11 | 320005.285060 | Yes |
| 28,5 | 8 | 10 | 63 | 10 | 8 | 11 | 320005.285080 | Yes |
| 28,5 | 10 | 12 | 71 | 10 | 10 | 11 | 320005.285100 | Yes |
| 32,5 | 6 | 12 | 71 | 10 | 320005.325060 | Yes | ||
| 32,5 | 8 | 12 | 71 | 10 | 8 | 13 | 320005.325080 | Yes |
| 32,5 | 10 | 12 | 71 | 10 | 10 | 13 | 320005.325100 | Yes |
| 38,5* | 8 | 12 | 71 | 10 | 320005.385080 | Yes | ||
| 45,5* | 8 | 12 | 71 | 12 | 320005.455080 | Yes | ||
| 45,5 | 10 | 12 | 71 | 12 | 10 | 16 | 320005.455100 | Yes |
*) ≠ DIN 850, ≠ DIN 6888
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 4,5 |
Ø 7,5 |
Ø 10,5 |
Ø 13,5 |
Ø 16,5 |
Ø 19,5 |
Ø 22,5 |
Ø 25,5 |
Ø 28,5 |
Ø 32,5 |
Ø 45,5 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P.1 | Free-cutting steel, general construction steels | ≤ 600 N/mm² | 1xS | t1 (DIN 6888) | 33 | 0.006 | 0.008 | 0.01 | 0.015 | 0.025 | 0.035 | 0.04 | 0.045 | 0.05 | 0.06 | 0.07 |
| P.2 | General construction steels, steel casting | ≤ 850 N/mm² | 1xS | t1 (DIN 6888) | 28 | 0.006 | 0.008 | 0.01 | 0.015 | 0.025 | 0.035 | 0.04 | 0.045 | 0.05 | 0.06 | 0.07 |
| P.3 | Tools steels low alloyed | ≤ 1100 N/mm² | 1xS | t1 (DIN 6888) | 22 | 0.006 | 0.008 | 0.01 | 0.015 | 0.025 | 0.035 | 0.04 | 0.045 | 0.05 | 0.06 | 0.07 |
| N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1xS | t1 (DIN 6888) | 45 | 0.08 | 0.01 | 0.013 | 0.02 | 0.033 | 0.046 | 0.052 | 0.059 | 0.065 | 0.078 | 0.091 |
| S.2 | Titanium, titanium alloys | ≤ 1250 N/mm² | 1xS | t1 (DIN 6888) | 11 | 0.006 | 0.004 | 0.007 | 0.011 | 0.018 | 0.025 | 0.028 | 0.032 | 0.035 | 0.042 | 0.49 |
Calculations of cutting conditions
Product attributes
Plain straight shank according to DIN 1835 A.
Design of cutting edge - straight teeth
Cutting edges on the perimeter of the side and face cutter.
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Helix angle = 10°.
Rake angle = 10°.
Design of cutting edge - alternating teeth
