End mills extra short, type N, code 120218K, diameter 25 mm
D
k 10 |
d
h 6 | l1 | l2 | Z | Item code | On stock |
---|---|---|---|---|---|---|
25 | 16 | 75 | 20 | 5 | 120218K.250020 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 30 |
Ø 35 |
Ø 40 |
Ø 50 |
---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 1xD | 0,1xD | 45 | 0.085 | 0.098 | 0.11 | 0.13 |
P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 1xD | 0,1xD | 39 | 0.085 | 0.098 | 0.11 | 0.13 |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 1xD | 0,1xD | 24 | 0.085 | 0.098 | 0.11 | 0.13 |
P.4 | Heat treatable steels | ≤ 900 N/mm² | 1xD | 0,1xD | 30 | 0.085 | 0.098 | 0.11 | 0.13 |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 1xD | 0,1xD | 15 | 0.085 | 0.098 | 0.11 | 0.13 |
N.4 | Cooper-zinc alloys, cooper-tin alloys | ≤ 850 N/mm² | 1xD | 0,1xD | 80-120 | 0.085 | 0.098 | 0.11 | 0.13 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Type N
more +Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility
Company norm
Tool geometry
more +Helix angle = 30°.
Rake angle = 12°.
Material HSS Co8
more +Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with high strength, austenitic steels, steels for warm working, etc.