English
  1. Home
  2. Products

Products

120518 SET
Set of end mills short, 1 tooth cut over centre, type N

Set of end mills short, 1 tooth cut over centre, type N

  • High-speed steel HSS Co8
  • DIN 844K
124518 SET
Set of end mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank

Set of end mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank

  • High-speed steel HSS Co5
  • DIN 844K
140218 SET
Set of end mills short, 40°, type N, Weldon shank

Set of end mills short, 40°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
140618 SET
Set of end mills short, 2 teeth cut to centre, 40°, type N, Weldon shank

Set of end mills short, 2 teeth cut to centre, 40°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
220418 SET
Set of slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank

Set of slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 327K
221418 SET
Set of slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank

Set of slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank

  • High-speed steel HSS Co8
230418 SET
Set of end mills, short, 3-fluted, λ 30°, type N, weldon shank

Set of end mills, short, 3-fluted, λ 30°, type N, weldon shank

  • High-speed steel HSS-Co8
  • DIN 327
104418P SET
Set of end mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

Set of end mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
124417 AlTiN
End mills short, 1 tooth cut over centre, λ 30°, type NR, weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, λ 30°, type NR, weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
100405 SET
Set of end mills short, 1 tooth cut over centre, 30°, type W, plain shank

Set of end mills short, 1 tooth cut over centre, 30°, type W, plain shank

  • High-speed steel HSS Co5
120517 AlTiN SET
Set of end mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

Set of end mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
100405
End mills short, 1 tooth cut over centre, 30°, type W, plain shank

End mills short, 1 tooth cut over centre, 30°, type W, plain shank

  • High-speed steel HSS Co5
101405
End mills long, 1 tooth cut over centre, 30°, type W, plain shank

End mills long, 1 tooth cut over centre, 30°, type W, plain shank

  • High-speed steel HSS Co5
110418
End mills short, 1 tooth cut over centre, 40°, type W, Weldon shank

End mills short, 1 tooth cut over centre, 40°, type W, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
111418
End mills long, 1 tooth cut over centre, 40°, type W, Weldon shank

End mills long, 1 tooth cut over centre, 40°, type W, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
114418
End mills short for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank

End mills short for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
115418
End mills long for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank

End mills long for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
270618
Slot drills short, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank

Slot drills short, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
273618
Slot drills long, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank

Slot drills long, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
100405 ZrN
End mills short, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN

End mills short, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN

  • High-speed steel HSS Co5
101405 ZrN
End mills long, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN

End mills long, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN

  • High-speed steel HSS Co5
DPR12018
Cylindrical face cutters, short, 1 cutting edge across the centre, 30°, type N, weldon flat, diameter 31.75 mm

Cylindrical face cutters, short, 1 cutting edge across the centre, 30°, type N, weldon flat, diameter 31.75 mm

  • High-speed steel HSS Co8
DPR12118
Face cutters, long, 1 cutting edge across the centre, 30°, type N, weldon flat, diameter 19 mm

Face cutters, long, 1 cutting edge across the centre, 30°, type N, weldon flat, diameter 19 mm

  • High-speed steel HSS Co8
DPR12518
Cylindrical face cutters, long, 2 cutting edges through the centre, 30°, type NR, weldon flat, diameter 31.75 mm

Cylindrical face cutters, long, 2 cutting edges through the centre, 30°, type NR, weldon flat, diameter 31.75 mm

  • High-speed steel HSS Co8
DPR12918
Face cutters, long, 1 cutting edge through the centre, 30°, type HR, weldon flat, diameter 19.1 mm

Face cutters, long, 1 cutting edge through the centre, 30°, type HR, weldon flat, diameter 19.1 mm

  • High-speed steel HSS Co8
DPR14017
Cylindrical face milling cutters, short, 1 cutting edge across the centre, 45°, type N, weldon flat, diameter 12.7 mm

Cylindrical face milling cutters, short, 1 cutting edge across the centre, 45°, type N, weldon flat, diameter 12.7 mm

  • High-speed steel HSS Co8
DPR28017
Tongue groove cutters short, double-toothed, asymmetrical, 30°, type N, weldon flat, diameter 12.7 mm

Tongue groove cutters short, double-toothed, asymmetrical, 30°, type N, weldon flat, diameter 12.7 mm

  • High-speed steel HSS Co8
DPR28018
Tongue groove cutters short, double-toothed, asymmetrical, 30°, type N, weldon flat, diameter 12.7 mm

Tongue groove cutters short, double-toothed, asymmetrical, 30°, type N, weldon flat, diameter 12.7 mm

  • High-speed steel HSS Co8
DPR51018
Short copy cutters, two-toothed, 30°, weldon facet, diameter 12.7 mm

Short copy cutters, two-toothed, 30°, weldon facet, diameter 12.7 mm

  • High-speed steel HSS Co8
DPR12017X
Cylindrical face cutters, short, 2 cutting edges to centre, 30°, type N, weldon face, diameter 12.7 mm

Cylindrical face cutters, short, 2 cutting edges to centre, 30°, type N, weldon face, diameter 12.7 mm

  • High-speed steel HSS Co8
DPR12617L ALTIN
Cylindrical face milling cutters, long, 2 cutting edges across the centre, 30°, type NR, weldon flat, AlTiN coating

Cylindrical face milling cutters, long, 2 cutting edges across the centre, 30°, type NR, weldon flat, AlTiN coating

  • High-speed steel HSS Co8
DPR12618P ALTIN
Cylindrical face milling cutters, short, 2 edges across the centre, 30°, type N, weldon flat, diameter 12 mm, AlTiN coating

Cylindrical face milling cutters, short, 2 edges across the centre, 30°, type N, weldon flat, diameter 12 mm, AlTiN coating

  • High-speed steel HSS Co8
DPR12618PX AlTiN
Cylindrical face milling cutters, short, 2 edges across the centre, 30°, type NR, weldon face, diameter 6 mm, AlTiN coating

Cylindrical face milling cutters, short, 2 edges across the centre, 30°, type NR, weldon face, diameter 6 mm, AlTiN coating

  • High-speed steel HSS Co8
DPR12617 ALTIN
Cylindrical face milling cutters, short, 2 edges across the centre, 30°, NR type, weldon face, diameter 12.7 mm, AlTiN coating

Cylindrical face milling cutters, short, 2 edges across the centre, 30°, NR type, weldon face, diameter 12.7 mm, AlTiN coating

  • High-speed steel HSS Co8
DPR12717 ALTIN
Cylindrical face milling cutters, short, 2 edges across the centre, 30°, NR type, weldon face, diameter 12.7 mm, AlTiN coating

Cylindrical face milling cutters, short, 2 edges across the centre, 30°, NR type, weldon face, diameter 12.7 mm, AlTiN coating

  • High-speed steel HSS Co8
120508
End mills short, 1 tooth cut over centre, 30°, type N, plain shank

End mills short, 1 tooth cut over centre, 30°, type N, plain shank

  • High-speed steel HSS Co8
  • DIN 844K
120518
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
121518
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
124518
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
125518
End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank

End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
128518
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
129518
End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank

End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
140208
End mills short, 40°, type N, plain shank

End mills short, 40°, type N, plain shank

  • High-speed steel HSS Co8
  • DIN 844K
140218
End mills short, 40°/35°, type N, Weldon shank

End mills short, 40°/35°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
140418
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
140618
End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank

End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
141208
End mills long, 40°, type N, plain shank

End mills long, 40°, type N, plain shank

  • High-speed steel HSS Co8
  • DIN 844L
141218
End mills long, 40°/35°, type N, Weldon shank

End mills long, 40°/35°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
141618
End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank

End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
160418
Mini end mills short, 30°, type N, Weldon shank

Mini end mills short, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
161418
Mini end mills long, 30°, type N, Weldon shank

Mini end mills long, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
220408
Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank

Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank

  • High-speed steel HSS Co8
  • DIN 327K
220418
Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank

Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 327K
221408
Slot drills long, 2-fluted, centre cutting, 25°, type N, plain shank

Slot drills long, 2-fluted, centre cutting, 25°, type N, plain shank

  • High-speed steel HSS Co8
221418
Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank

Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank

  • High-speed steel HSS Co8
230418
Slot drills short, 3-fluted, centre cutting, 25°, type N, Weldon shank

Slot drills short, 3-fluted, centre cutting, 25°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 327K
231418
Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank

Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 327L
233418
Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank

Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
510418
Ball nose end mills short, 2-fluted, 25°, Weldon shank

Ball nose end mills short, 2-fluted, 25°, Weldon shank

  • High-speed steel HSS Co8
  • ~DIN 1889
511418
Ball nose end mills long, 2-fluted, 25°, Weldon shank

Ball nose end mills long, 2-fluted, 25°, Weldon shank

  • High-speed steel HSS Co8
530718
Ball nose end mills short, semicircular teeth, Weldon shank

Ball nose end mills short, semicircular teeth, Weldon shank

  • High-speed steel HSS Co8
  • ~DIN 1889
531718
Ball nose end mills long, semicircular teeth, Weldon shank

Ball nose end mills long, semicircular teeth, Weldon shank

  • High-speed steel HSS Co8
  • ~DIN 1889
580718
Die sinking cutters tapered, 4-fluted, 25°, Weldon shank

Die sinking cutters tapered, 4-fluted, 25°, Weldon shank

  • High-speed steel HSS Co8
104418P
End mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

End mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
105418P
End mills long, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

End mills long, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
120218K
End mills extra short, type N, 30°, Weldon shank

End mills extra short, type N, 30°, Weldon shank

  • High-speed steel HSS Co8
121215E
End mils extra long, type N, 30°, Weldon shank

End mils extra long, type N, 30°, Weldon shank

  • High-speed steel HSS Co5
124218K
End mills extra short, type NR, 30°, Weldon shank

End mills extra short, type NR, 30°, Weldon shank

  • High-speed steel HSS Co8
124518P
End mills short, 1 tooth cut over centre, 30°, type NR-F, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type NR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
125215E
End mils extra long, type NR, 30°, Weldon shank

End mils extra long, type NR, 30°, Weldon shank

  • High-speed steel HSS Co5
125518P
End mills long, 1 tooth cut over centre, 30°, type NR-F, Weldon shank

End mills long, 1 tooth cut over centre, 30°, type NR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
128518P
End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
128518S
End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank

End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank

  • High-speed steel HSS Co8
129518P
End mills long, 1 tooth cut over centre, 30°, type HR-F, Weldon shank

End mills long, 1 tooth cut over centre, 30°, type HR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
230418H
Slot drills short, 3-fluted centre cutting, 30°, type N, Weldon shank

Slot drills short, 3-fluted centre cutting, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 327K
120417 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
120517 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
120518 TiAlN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844K
121517 AlTiN
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844L
121518 TiAlN
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844L
124517 AlTiN
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
124518 TiAlN
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN

  • High-speed steel HSS Co5
  • DIN 844K
125517 AlTiN
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844L
125518 TiAlN
End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN

End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844L
128517 AlTiN
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
128518 TiAlN
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844K
129517 AlTiN
End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844L
129518 TiAlN
End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844L
140418 TiAlN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844K
140618 TiAlN
End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN

End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844K
141618 TiAlN
End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN

End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844L
148617 AlTiN
End mills short, 1 tooth cut over centre, 45°, type HR, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 45°, type HR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
160418 TiAlN
Mini end mills short, 30°, type N, Weldon shank, coating TiAlN

Mini end mills short, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
161418 TiAlN
Mini end mills long, 30°, type N, Weldon shank, coating TiAlN

Mini end mills long, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
120517R AlTiN
End mills with corner radius, 30°, type N, Weldon shank, coating AlTiN

End mills with corner radius, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
220408 TiAlN
Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank, coating TiAlN

Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 327K
220417 AlTiN
Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating AlTiN

Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 327K
220418 TiAlN
Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN

Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 327K
221418 TiAlN
Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN

Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
230417 AlTiN
Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating AlTiN

Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 327K
230418 TiAlN
Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 327K
231418 TiAlN
Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 327L
233418 TiAlN
Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
128517P AlTiN
End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
128517X AlTiN
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
128518S TiAlN
End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
140617X AlTiN
End mills with variable helix angle, 38°-42°, type N, Weldon shank, coating AlTiN

End mills with variable helix angle, 38°-42°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
148517R AlTiN
End mills with corner radius, type HR, 45°, Weldon shank, coating AlTiN

End mills with corner radius, type HR, 45°, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
150617S AlCrN
End mills for stainless steel, 50°, type N, Weldon shank, coating AlCrN

End mills for stainless steel, 50°, type N, Weldon shank, coating AlCrN

  • High-speed steel HSSE-PM
150617S AlTiN
End mills for stainless steel, 50°, type N, Weldon shank, coating AlTiN

End mills for stainless steel, 50°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
510417 AlTiN
Ball nose end mills short, 2-fluted, 25°, Weldon shank, coating AlTiN

Ball nose end mills short, 2-fluted, 25°, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • ~DIN 1889
C121302
End mills long, 1 tooth cut over centre, 20°, type W, plain shank

End mills long, 1 tooth cut over centre, 20°, type W, plain shank

  • Solid carbide (SC)
C121312
End mills long, 1 tooth cut over centre, 20°, type W, Weldon

End mills long, 1 tooth cut over centre, 20°, type W, Weldon

  • Solid carbide (SC)
S100502
End mills short, 1 tooth cut over centre, 25°, type N, plain shank

End mills short, 1 tooth cut over centre, 25°, type N, plain shank

  • Solid carbide (SC)
S171502
End mills short, 1 tooth cut over centre, left helix, 20°, type N, plain shank

End mills short, 1 tooth cut over centre, left helix, 20°, type N, plain shank

  • Solid carbide (SC)
S112402L
End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank

End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank

  • Solid carbide (SC)
S112412L
End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank

End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank

  • Solid carbide (SC)
S112402LR
End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, plain shank

End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, plain shank

  • Solid carbide (SC)
S112412LR
End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, Weldon shank

End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, Weldon shank

  • Solid carbide (SC)
S111712 AlCrN
End mills long, λ 45°, type NR, weldon shank, coating AlCrN

End mills long, λ 45°, type NR, weldon shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527
S151612R AlCr
End mills long with corner radius, 2 teeth cut to centre, 40°-42°, type N, Weldon shank, coating AlCr

End mills long with corner radius, 2 teeth cut to centre, 40°-42°, type N, Weldon shank, coating AlCr

  • Solid carbide (SC)
  • DIN 6527L
S120702R TiSiN
End mills short with corner radius, λ 30°, type H, plain shank, coating TiSiN

End mills short with corner radius, λ 30°, type H, plain shank, coating TiSiN

  • Solid carbide (SC)
  • DIN 6527
S122502T AlCrN
End mills short for trochoidal milling, λ 37°/30°, type CB, plain shank, coating AlCrN

End mills short for trochoidal milling, λ 37°/30°, type CB, plain shank, coating AlCrN

  • Solid carbide (SC)
S122512T AlCrN
End mills short for trochoidal milling, λ 37°/30°, type CB, weldon shank, coating AlCrN

End mills short for trochoidal milling, λ 37°/30°, type CB, weldon shank, coating AlCrN

  • Solid carbide (SC)
S511702 TiSiN
Die sinking short, 2-fluted, λ 15°, type H, plain shank, coating TiSiN

Die sinking short, 2-fluted, λ 15°, type H, plain shank, coating TiSiN

  • Solid carbide (SC)
S151702R TiSiN
End mills short with corner radius, fine teeth, λ 50°, type H, plain shank, coating TiSiN

End mills short with corner radius, fine teeth, λ 50°, type H, plain shank, coating TiSiN

  • Solid carbide (SC)
  • DIN 6527
S152502R AlCrN
End mills long with corner radius, 44°-45°, type N, plain shank, coating AlCrN

End mills long with corner radius, 44°-45°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
S152512R AlCrN
End mills long with corner radius, 44°-45°, type N, Weldon shank, coating AlCrN

End mills long with corner radius, 44°-45°, type N, Weldon shank, coating AlCrN

  • Solid carbide (SC)
S111402R ZRN
End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, plain shank, coating ZrN

End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, plain shank, coating ZrN

  • Solid carbide (SC)
S111412R ZRN
End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, Weldon shank, coating ZrN

End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, Weldon shank, coating ZrN

  • Solid carbide (SC)
S112402R ZRN
End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank, coating ZrN

End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank, coating ZrN

  • Solid carbide (SC)
S112412R ZrN
End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank, coating ZrN

End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank, coating ZrN

  • Solid carbide (SC)
S100602
End mills short, 1 tooth cut over centre, 30°, type N, plain shank

End mills short, 1 tooth cut over centre, 30°, type N, plain shank

  • Solid carbide (SC)
S111402
End mills long, 1 tooth cut over centre, 45°, type W, plain shank

End mills long, 1 tooth cut over centre, 45°, type W, plain shank

  • Solid carbide (SC)
S111412
End mills long, 1 tooth cut over centre, 45°, type W, Weldon shank

End mills long, 1 tooth cut over centre, 45°, type W, Weldon shank

  • Solid carbide (SC)
S111502
End mills long, 2 teeth cut to centre, 38°, type W, plain shank

End mills long, 2 teeth cut to centre, 38°, type W, plain shank

  • Solid carbide (SC)
S111512
End mills long, 2 teeth cut to centre, 38°, type W, Weldon shank

End mills long, 2 teeth cut to centre, 38°, type W, Weldon shank

  • Solid carbide (SC)
S111602
End mills long, 2 teeth cut to centre, 45°, type W, plain shank

End mills long, 2 teeth cut to centre, 45°, type W, plain shank

  • Solid carbide (SC)
S111612
End mills long, 2 teeth cut to centre, 45°, type W, Weldon shank

End mills long, 2 teeth cut to centre, 45°, type W, Weldon shank

  • Solid carbide (SC)
S115402
End mills long, 1 tooth cut over centre, 25°, type WR, plain shank

End mills long, 1 tooth cut over centre, 25°, type WR, plain shank

  • Solid carbide (SC)
S115412
End mills long, 1 tooth cut over centre, 25°, type WR, Weldon shank

End mills long, 1 tooth cut over centre, 25°, type WR, Weldon shank

  • Solid carbide (SC)
S111402N
End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank, coating CrN

End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank, coating CrN

  • Solid carbide (SC)
S111412N
End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank, coating CrN

End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank, coating CrN

  • Solid carbide (SC)
C100402
End mills short, 1 tooth cut over centre, 30°, type N, plain shank

End mills short, 1 tooth cut over centre, 30°, type N, plain shank

  • Solid carbide (SC)
C120402
End mills short, 1 tooth cut over centre, 30°, type N, plain shank

End mills short, 1 tooth cut over centre, 30°, type N, plain shank

  • Solid carbide (SC)
C120602
End mills short, 2 teeth cut to centre, 30°, type N, plain shank

End mills short, 2 teeth cut to centre, 30°, type N, plain shank

  • Solid carbide (SC)
C160402
Mini end mills, 1 tooth cut over centre, 30°, plain shank

Mini end mills, 1 tooth cut over centre, 30°, plain shank

  • Solid carbide (SC)
S151712R
End mills extra long, fine teeth, 50°-35°, type H, Weldon shank

End mills extra long, fine teeth, 50°-35°, type H, Weldon shank

  • Solid carbide (SC)
S102402R AlCrN
End mills long with corner radius, 1 tooth cut over centre, 30°, type N, plain shank, coating AlCrN

End mills long with corner radius, 1 tooth cut over centre, 30°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S100402 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S100412 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S101402 AlTiN
End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S101412 AlTiN
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S102402 AlCrN
End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlCrN

End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S109602 AlTiN
End mills long, 2 teeth cut to centre, 20°, type HR, plain shank, coating AlTiN

End mills long, 2 teeth cut to centre, 20°, type HR, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S109612 AlTiN
End mills long, 2 teeth cut to centre, 20°, type HR, Weldon shank, coating AlTiN

End mills long, 2 teeth cut to centre, 20°, type HR, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S111702 AlCrN
End mills long, λ 45°, type NR, plain shank, coating AlCrN

End mills long, λ 45°, type NR, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527
S113602 AlTiN
End mills long, 2 teeth cut to centre, 45°, typ CB, plain shank, coating AlTiN

End mills long, 2 teeth cut to centre, 45°, typ CB, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S113612 AlTiN
End mills long, 2 teeth cut to centre, 45°, typ CB, Weldon shank, coating AlTiN

End mills long, 2 teeth cut to centre, 45°, typ CB, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S511602E AlCrN
Extra long ball nose end mills, type N, plain shank, coating AlCrN

Extra long ball nose end mills, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
S119602 AlTiN
End mills long, 45°, type HR, plain shank, coating AlTiN

End mills long, 45°, type HR, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S119612 AlTiN
End mills long, 45°, type HR, Weldon shank, coating AlTiN

End mills long, 45°, type HR, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S120402 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S120412 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S120602 AlTiN
End mills short, 2 teeth cut to centre, 30°, type N, plain shank, coating AlTiN

End mills short, 2 teeth cut to centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S120612 AlTiN
End mills short, 2 teeth cut to centre, 30°, type N, Weldon shank, coating AlTiN

End mills short, 2 teeth cut to centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S121402 AlTiN
End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S121412 AlTiN
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S121602 AlTiN
End mills long, 2 teeth cut to centre, 30°, type N, plain shank, coating AlTiN

End mills long, 2 teeth cut to centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S121612 AlTiN
End mills long, 2 teeth cut to centre, 30°, type N, Weldon shank, coating AlTiN

End mills long, 2 teeth cut to centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S131602 AlTiN
End mills long, fine teeth, 45°, type H, plain shank, coating AlTiN

End mills long, fine teeth, 45°, type H, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S131612 AlTiN
End mills long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

End mills long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S140402 AlTiN
End mills short, 1 tooth cut over centre, 45°, type N, plain shank, coating AlTiN

End mills short, 1 tooth cut over centre, 45°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S140412 AlTiN
End mills short, 1 tooth cut over centre, 45°, type N, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 45°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S141402 AlTiN
End mills long, 1 tooth cut over centre, 45°, type N, plain shank, coating AlTiN

End mills long, 1 tooth cut over centre, 45°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S141412 AlTiN
End mills long, 1 tooth cut over centre, 45°, type N, Weldon shank, coating AlTiN

End mills long, 1 tooth cut over centre, 45°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S143502T AlCr
End mills long, 41°-42°, type T, plain shank, coating AlCr

End mills long, 41°-42°, type T, plain shank, coating AlCr

  • Solid carbide (SC)
S143512T AlCr
End mills long, 41°-42°, type T, Weldon shank, coating AlCr

End mills long, 41°-42°, type T, Weldon shank, coating AlCr

  • Solid carbide (SC)
S151602R AlCr
End mills long with corner radius, 2 teeth cut to centre, 40°-42°, type N, plain shank, coating AlCr

End mills long with corner radius, 2 teeth cut to centre, 40°-42°, type N, plain shank, coating AlCr

  • Solid carbide (SC)
  • DIN 6527L
S151702 AlCrN
End mills long, fine teeth, 45°, type HPC, plain shank, coating AlCrN

End mills long, fine teeth, 45°, type HPC, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S151712 AlCrN
End mills long, fine teeth, 45°, type HPC, weldon shank, coating AlCrN

End mills long, fine teeth, 45°, type HPC, weldon shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S118602N AlCrN
End mills short, 45°, type HR, plain shank, coating AlCrN

End mills short, 45°, type HR, plain shank, coating AlCrN

  • Solid carbide (SC)
S118612N AlCrN
End mills short, 45°, type HR, Weldon shank, coating AlCrN

End mills short, 45°, type HR, Weldon shank, coating AlCrN

  • Solid carbide (SC)
S119602N AlCrN
End mills long, 2 teeth cut to centre, 45°, type HR, plain shank, coating AlCrN

End mills long, 2 teeth cut to centre, 45°, type HR, plain shank, coating AlCrN

  • Solid carbide (SC)
S119612N AlCrN
End mills long, 2 teeth cut to centre, 45°, type HR, Weldon shank, coating AlCrN

End mills long, 2 teeth cut to centre, 45°, type HR, Weldon shank, coating AlCrN

  • Solid carbide (SC)
S123502T AlCrN
End mills long, 37°-38°, trochiodal milling, type CB, plain shank, coating AlCrN

End mills long, 37°-38°, trochiodal milling, type CB, plain shank, coating AlCrN

  • Solid carbide (SC)
S123512T AlCrN
End mills long, 37°-38°, trochiodal milling, type CB, Weldon shank, coating AlCrN

End mills long, 37°-38°, trochiodal milling, type CB, Weldon shank, coating AlCrN

  • Solid carbide (SC)
S260402 AlTiN
Mini sinking cutters, type N, plain shank, coating AlTiN

Mini sinking cutters, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
S531602E AlCrN
Extra long ball nose end mills, type N, plain shank, coating AlCrN

Extra long ball nose end mills, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
S131602E AlTiN
End mills extrax long, fine teeth, 45°, type H, plain shank, coating AlTiN

End mills extrax long, fine teeth, 45°, type H, plain shank, coating AlTiN

  • Solid carbide (SC)
S131602L AlTiN
End mills extra long, fine teeth, 45°, type H, plain shank, coating AlTiN

End mills extra long, fine teeth, 45°, type H, plain shank, coating AlTiN

  • Solid carbide (SC)
S131612E AlTiN
End mills extrax long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

End mills extrax long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

  • Solid carbide (SC)
S131612L AlTiN
End mills extra long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

End mills extra long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

  • Solid carbide (SC)
S140602N AlCrN
End mills short, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

End mills short, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527K
S140612N AlCrN
End mills short, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

End mills short, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527K
S141402X AlCrN
End mills long, 1 tooth cut over centre, 37°-39°, type N, plain shank, cating AlCrN

End mills long, 1 tooth cut over centre, 37°-39°, type N, plain shank, cating AlCrN

  • Solid carbide (SC)
S141412X AlCrN
End mills long, 1 tooth cut over centre, 37°-39°, type N, weldon shank, cating AlCrN

End mills long, 1 tooth cut over centre, 37°-39°, type N, weldon shank, cating AlCrN

  • Solid carbide (SC)
S141602N AlCrN
End mills long, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

End mills long, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S141602R AlCrN
End mills long with corner radius, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

End mills long with corner radius, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S141602X AlTiN
End mills long, 2 teeth cut to centre, 35°–38°, type N, plain shank, coating AlTiN

End mills long, 2 teeth cut to centre, 35°–38°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S141612N AlCrN
End mills long, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

End mills long, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S141612R AlCrN
End mills long with corner radius, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

End mills long with corner radius, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S141612X AlTiN
End mills long, 2 teeth cut to centre, 35°–38°, type N, Weldon shank, coating AlTiN

End mills long, 2 teeth cut to centre, 35°–38°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S510602 AlTiN
Ball nose end mills short, 2-fluted, type N, plain shank, coating AlTiN

Ball nose end mills short, 2-fluted, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S510612 AlTiN
Ball nose end mills short, 2-fluted, type N, Weldon shank, coating AlTiN

Ball nose end mills short, 2-fluted, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S511602 AlTiN
Ball nose end mills long, 2-fluted, type N, plain shank, coating AlTiN

Ball nose end mills long, 2-fluted, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S511612 AlTiN
Ball nose end mills long, 2-fluted, type N, Weldon shank, coating AlTiN

Ball nose end mills long, 2-fluted, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S151702R AlCrN
End mills extra long, fine teeth, 50°-35°, type H, plain shank

End mills extra long, fine teeth, 50°-35°, type H, plain shank

  • Solid carbide (SC)
S560602 AlTiN
Mini sinking cutters, type N, plain shank, coating AlTiN

Mini sinking cutters, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
S151602 AlCr
End mills long, 2 teeth cut to centre, 40°-42°, type N, plain shank, coating AlCr

End mills long, 2 teeth cut to centre, 40°-42°, type N, plain shank, coating AlCr

  • Solid carbide (SC)
  • DIN 6527L
S151612 AlCr
End mills long, 2 teeth cut to centre, 40°-42°, type N, Weldon shank, coating AlCr

End mills long, 2 teeth cut to centre, 40°-42°, type N, Weldon shank, coating AlCr

  • Solid carbide (SC)
  • DIN 6527L
S152602 AlCr
End mills long, 55°, type N, plain shank, coating AlCr

End mills long, 55°, type N, plain shank, coating AlCr

  • Solid carbide (SC)
S152612 AlCr
End mills long, 55°, type N, Weldon shank, coating AlCr

End mills long, 55°, type N, Weldon shank, coating AlCr

  • Solid carbide (SC)
S350102 AlTiN
Chamfer end mills, 60°, 90°, type N, plain shank, coating AlTiN

Chamfer end mills, 60°, 90°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
DPR33008
Angle cutters - face cutters, smooth shank, angle 60°, diameter 16 mm

Angle cutters - face cutters, smooth shank, angle 60°, diameter 16 mm

  • High-speed steel HSS Co8
DPR36018
Quarter-circle concave cutters, weldon flat, diameter 2 mm

Quarter-circle concave cutters, weldon flat, diameter 2 mm

  • High-speed steel HSS Co8
310205
T-slot cutters, type N, plain shank

T-slot cutters, type N, plain shank

  • High-speed steel HSS Co5
  • DIN 851
310215
T-slot cutters, type N, Weldon shank

T-slot cutters, type N, Weldon shank

  • High-speed steel HSS Co5
  • DIN 851
320005
Woodruff keyseat cutters, plain shank

Woodruff keyseat cutters, plain shank

  • High-speed steel HSS Co5
  • DIN 850
320015
Woodruff keyseat cutters, Weldon shank

Woodruff keyseat cutters, Weldon shank

  • High-speed steel HSS Co5
  • DIN 850
320100
Woodruff keyseat cutters, plain shank

Woodruff keyseat cutters, plain shank

  • High-speed steel HSS
330205
Dovetail milling cutters, plain shank

Dovetail milling cutters, plain shank

  • High-speed steel HSS Co5
  • DIN 1833A
330215
Dovetail milling cutters, Weldon shank

Dovetail milling cutters, Weldon shank

  • High-speed steel HSS Co5
  • DIN 1833C
350005
Inverted dovetail milling cutters, plain shank

Inverted dovetail milling cutters, plain shank

  • High-speed steel HSS Co5
  • DIN 1833B
350015
Inverted dovetail milling cutters, Weldon shank

Inverted dovetail milling cutters, Weldon shank

  • High-speed steel HSS Co5
  • DIN 1833D
360018
Corner rounding concave cutters, Weldon shank

Corner rounding concave cutters, Weldon shank

  • High-speed steel HSS Co8
  • DIN 6518
314215N
T-slot cutters, type NR, Weldon shank

T-slot cutters, type NR, Weldon shank

  • High-speed steel HSS Co5
  • DIN 851
314215P
T-slot cutters, type NR-F, Weldon shank

T-slot cutters, type NR-F, Weldon shank

  • High-speed steel HSS Co5
  • DIN 851
S390002
Multifuncion end mills, 90°, type N, plain shank

Multifuncion end mills, 90°, type N, plain shank

  • Solid carbide (SC)
314215PH
T-slot cutters, type NR-F, Weldon shank

T-slot cutters, type NR-F, Weldon shank

  • High-speed steel HSS Co5
  • DIN 851
S350002 AlTiN
Chamfer end mills, 90°, 60°, type N, Weldon shank

Chamfer end mills, 90°, 60°, type N, Weldon shank

  • Solid carbide (SC)
S360002 AlTiN
Corner rounding concave cutters, type N, Weldon shank

Corner rounding concave cutters, type N, Weldon shank

  • Solid carbide (SC)
S390002 AlTiN
Multifuncion end mills, 90°, type N, plain shank, coating AlTiN

Multifuncion end mills, 90°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
410940
Tapper shank end mills short, coarse teeth, 45°, type W

Tapper shank end mills short, coarse teeth, 45°, type W

  • High-speed steel HSS
  • DIN 845
411940
Tapper shank end mills long, coarse teeth, 45°, type W

Tapper shank end mills long, coarse teeth, 45°, type W

  • High-speed steel HSS
  • DIN 845
420940
Tapper shank end mills short, semicoarse teeth, 35°, type N

Tapper shank end mills short, semicoarse teeth, 35°, type N

  • High-speed steel HSS
  • DIN 845
421940
Tapper shank end mills long, semicoarse teeth, 35°, type N

Tapper shank end mills long, semicoarse teeth, 35°, type N

  • High-speed steel HSS
  • DIN 845
422940
Tapper shank end mills short, semicoarse teeth, 35°, type CB

Tapper shank end mills short, semicoarse teeth, 35°, type CB

  • High-speed steel HSS
  • DIN 845
423940
Tapper shank end mills long, semicoarse teeth, 35°, type CB

Tapper shank end mills long, semicoarse teeth, 35°, type CB

  • High-speed steel HSS
  • DIN 845
442248
Tapper shank end mills short, for titanium machining, 35°, type CB

Tapper shank end mills short, for titanium machining, 35°, type CB

  • High-speed steel HSS Co8
  • DIN 845B
443248
Tapper shank end mills long, for titanium machining, 35°, type CB

Tapper shank end mills long, for titanium machining, 35°, type CB

  • High-speed steel HSS Co8
  • DIN 845B
260545
Tapper shank slot drills short, centre cutting, 2-fluted, 25°, type N

Tapper shank slot drills short, centre cutting, 2-fluted, 25°, type N

  • High-speed steel HSS Co5
  • DIN 326
310340
Tapper shank T-slot cutters, type N

Tapper shank T-slot cutters, type N

  • High-speed steel HSS
  • DIN 851
410245
Tapper shank end mills short, coarse teeth, 45°, type W

Tapper shank end mills short, coarse teeth, 45°, type W

  • High-speed steel HSS Co5
  • DIN 845
411245
Tapper shank end mills long, coarse teeth, 45°, type W

Tapper shank end mills long, coarse teeth, 45°, type W

  • High-speed steel HSS Co5
  • DIN 845
420245
Tapper shank end mills short, semicoarse teeth, 35°, type N

Tapper shank end mills short, semicoarse teeth, 35°, type N

  • High-speed steel HSS Co5
  • DIN 845
421245
Tapper shank end mills long, semicoarse teeth, 35°, type N

Tapper shank end mills long, semicoarse teeth, 35°, type N

  • High-speed steel HSS Co5
  • DIN 845
422245
Tapper shank end mills short, semicoarse teeth, 35°, type CB

Tapper shank end mills short, semicoarse teeth, 35°, type CB

  • High-speed steel HSS Co5
  • DIN 845
423245
Tapper shank end mills long, semicoarse teeth, 35°, type CB

Tapper shank end mills long, semicoarse teeth, 35°, type CB

  • High-speed steel HSS Co5
  • DIN 845
424248
Tapper shank end mills short, 30°, type NR

Tapper shank end mills short, 30°, type NR

  • High-speed steel HSS Co8
  • DIN 845B, DIN 845C
425248
Tapper shank end mills long, 30°, type NR

Tapper shank end mills long, 30°, type NR

  • High-speed steel HSS Co8
  • DIN 845B, DIN 845C
440248
Tapper shank end mills short, for titanium machining, 35°, type H

Tapper shank end mills short, for titanium machining, 35°, type H

  • High-speed steel HSS Co8
  • DIN 845B
441248
Tapper shank end mills long, for titanium machining, 35°, type H

Tapper shank end mills long, for titanium machining, 35°, type H

  • High-speed steel HSS Co8
  • DIN 845B
628277P AlTiN
End mills, semicoarse teeth, λ 30°, type HR-F, coating AlTiN

End mills, semicoarse teeth, λ 30°, type HR-F, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 1880
624277PV AlTiN
Shell end mills, semicoarse teeth, type NR-F, coating AlTiN

Shell end mills, semicoarse teeth, type NR-F, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 1880
628277 AlTiN
End mills, semicoarse teeth, λ 30°, type HR, coating AlTiN

End mills, semicoarse teeth, λ 30°, type HR, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 1880
610973
Shell end mills, coarse teeth, type W

Shell end mills, coarse teeth, type W

  • High-speed steel HSSE
620973
Shell end mills, semicoarse teeth, type N

Shell end mills, semicoarse teeth, type N

  • High-speed steel HSSE
630973
Shell end mills, fine teeth, type H

Shell end mills, fine teeth, type H

  • High-speed steel HSSE
630275V
Shell end mills, fine teeth, type H

Shell end mills, fine teeth, type H

  • High-speed steel HSS Co5
  • DIN 1880
620075
Shell end mills, semicoarse teeth, type N

Shell end mills, semicoarse teeth, type N

  • High-speed steel HSS Co5
620275
Shell end mills, semicoarse teeth, type N

Shell end mills, semicoarse teeth, type N

  • High-speed steel HSS Co5
  • DIN 1880
624275
Shell end mills, semicoarse teeth, type NR

Shell end mills, semicoarse teeth, type NR

  • High-speed steel HSS Co5
  • DIN 1880
628275
Shell end mills, semicoarse teeth, type HR

Shell end mills, semicoarse teeth, type HR

  • High-speed steel HSS Co5
  • DIN 1880
610275V
Shell end mills, coarse teeth, type W

Shell end mills, coarse teeth, type W

  • High-speed steel HSS Co5
  • DIN 1880
620278V
Shell end mills, semicoarse teeth, type N

Shell end mills, semicoarse teeth, type N

  • High-speed steel HSS Co8
  • DIN 1880
624278V
Shell end mills, semicoarse teeth, type NR

Shell end mills, semicoarse teeth, type NR

  • High-speed steel HSS Co8
  • DIN 1880
680275V
Shell end mills, semicoarse teeth, type N

Shell end mills, semicoarse teeth, type N

  • High-speed steel HSS Co5
  • DIN 841
684275V
Shell end mills, semicoarse teeth, type NR

Shell end mills, semicoarse teeth, type NR

  • High-speed steel HSS Co5
  • DIN 841
690275V
Shell end mills, fine teeth, type H

Shell end mills, fine teeth, type H

  • High-speed steel HSS Co5
  • DIN 841
624278PV
Shell end mills, semicoarse teeth, type NR-F

Shell end mills, semicoarse teeth, type NR-F

  • High-speed steel HSS Co8
  • DIN 1880
684275PV
Shell end mills, semicoarse teeth, type NR-F

Shell end mills, semicoarse teeth, type NR-F

  • High-speed steel HSS Co5
  • DIN 841
620278V TiAlN
Shell end mills, semicoarse teeth, type N, coating TiAlN

Shell end mills, semicoarse teeth, type N, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 1880
624278V TiAlN
Shell end mills, semicoarse teeth, type NR, coating TiAlN

Shell end mills, semicoarse teeth, type NR, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 1880
620275 TiAlN
Shell end mills, semicoarse teeth, type N, coating TiAlN

Shell end mills, semicoarse teeth, type N, coating TiAlN

  • High-speed steel HSS Co5
  • DIN 1880
620277 AlTiN
Shell end mills, semicoarse teeth, type N, coating AlTiN

Shell end mills, semicoarse teeth, type N, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 1880
624275 TiAlN
Shell end mills, semicoarse teeth, type NR, coating TiAlN

Shell end mills, semicoarse teeth, type NR, coating TiAlN

  • High-speed steel HSS Co5
  • DIN 1880
624277 AlTiN
Shell end mills, semicoarse teeth, type NR, coating AlTiN

Shell end mills, semicoarse teeth, type NR, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 1880
628275 TiAlN
Shell end mills, semicoarse teeth, type HR, coating TiAlN

Shell end mills, semicoarse teeth, type HR, coating TiAlN

  • High-speed steel HSS Co5
  • DIN 1880
720373
Side and face milling cutters, semicoarse teeth, type N

Side and face milling cutters, semicoarse teeth, type N

  • High-speed steel HSSE
730278
Side and face milling cutters, fine teeth, type H

Side and face milling cutters, fine teeth, type H

  • High-speed steel HSS Co8
  • DIN 885A
730373
Side and face milling cutters, fine teeth, type H

Side and face milling cutters, fine teeth, type H

  • High-speed steel HSSE
737275
Narrow side and face milling cutters, fine teeth, straight teeth, type N

Narrow side and face milling cutters, fine teeth, straight teeth, type N

  • High-speed steel HSS Co5
  • DIN 1834B
720275
Side and face milling cutters, semicoarse teeth, type N

Side and face milling cutters, semicoarse teeth, type N

  • High-speed steel HSS Co5
  • DIN 885A
726275
Narrow side and face milling cutters, type N

Narrow side and face milling cutters, type N

  • High-speed steel HSS Co5
730270
Side and face milling cutters, fine teeth, type H

Side and face milling cutters, fine teeth, type H

  • High-speed steel HSS
  • DIN 885A
730275
Side and face milling cutters, fine teeth, type H

Side and face milling cutters, fine teeth, type H

  • High-speed steel HSS Co5
  • DIN 885A
736275
Narrow side and face milling cutters, fine teeth, type H

Narrow side and face milling cutters, fine teeth, type H

  • High-speed steel HSS Co5
  • DIN 1834A
739275
Side and face milling cutters, straight teeth, type H

Side and face milling cutters, straight teeth, type H

  • High-speed steel HSS Co5
  • DIN 885B
890070 SET
Set - Involute gear cutters for spur wheels, pressure angle 20°

Set - Involute gear cutters for spur wheels, pressure angle 20°

  • High-speed steel HSS
  • DIN 3972
852570
Single angle milling cutters

Single angle milling cutters

  • High-speed steel HSS
  • ~DIN 1824A
890075
Involute gear cutters for spur wheels, pressure angle 20°

Involute gear cutters for spur wheels, pressure angle 20°

  • High-speed steel HSS Co5
  • DIN 3972
810070
Half circle milling cutters convex

Half circle milling cutters convex

  • High-speed steel HSS
  • ~DIN 856
820070
Half circle milling cutters concave

Half circle milling cutters concave

  • High-speed steel HSS
  • ~DIN 855A
853270
Single angle milling cutters

Single angle milling cutters

  • High-speed steel HSS
  • DIN 842
857070
Double angle milling cutters, symmetrical

Double angle milling cutters, symmetrical

  • High-speed steel HSS
  • DIN 847
890070
Involute gear cutters for spur wheels, pressure angle 20°

Involute gear cutters for spur wheels, pressure angle 20°

  • High-speed steel HSS
  • DIN 3972
810075V
Half circle milling cutters convex

Half circle milling cutters convex

  • High-speed steel HSS Co5
  • ~DIN 856
820075V
Half circle milling cutters concave

Half circle milling cutters concave

  • High-speed steel HSS Co5
  • ~DIN 855A
853275V
Single angle milling cutters

Single angle milling cutters

  • High-speed steel HSS Co5
  • DIN 842
857075V
Double angle milling cutters, symmetrical

Double angle milling cutters, symmetrical

  • High-speed steel HSS Co5
  • DIN 847
T1402MX
Solid carbide rotary burrs, type KUD, cutting profile MX

Solid carbide rotary burrs, type KUD, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/KUD
T1402MY
Solid carbide rotary burrs, type KUD cutting profile MY

Solid carbide rotary burrs, type KUD cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/KUD
T1502MX
Solid carbide rotary burrs, type SKM, cutting profile MX

Solid carbide rotary burrs, type SKM, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/SKM
T1502MY
Solid carbide rotary burrs, type SKM, cutting profile MY

Solid carbide rotary burrs, type SKM, cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/SKM
T1X02 SET
Set of solid carbide rotary burrs, cutting profile MX

Set of solid carbide rotary burrs, cutting profile MX

  • Solid carbide (SC)
T2002
Contour end mills for plastics, type W, plain shank

Contour end mills for plastics, type W, plain shank

  • Solid carbide (SC)
T2012
Contour end mills for plastics, type W, plain shank

Contour end mills for plastics, type W, plain shank

  • Solid carbide (SC)
T1002MX
Solid carbide rotary burrs, type ZYA-S, cutting profile MX

Solid carbide rotary burrs, type ZYA-S, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/ZYA-S
T1002MY
Solid carbide rotary burrs, type ZYA-S, cutting profile MY

Solid carbide rotary burrs, type ZYA-S, cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/ZYA-S
T1102MX
Solid carbide rotary burrs, type WRC, cutting profile MX

Solid carbide rotary burrs, type WRC, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/WRC
T1102MY
Solid carbide rotary burrs, type WRC, cutting profile MY

Solid carbide rotary burrs, type WRC, cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/WRC
T1202MX
Solid carbide rotary burrs, type SPG, cutting profile MX

Solid carbide rotary burrs, type SPG, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/SPG
T1202MY
Solid carbide rotary burrs, type SPG, cutting profile MY

Solid carbide rotary burrs, type SPG, cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/SPG
T1302MX
Solid carbide rotary burrs, type RBF, cutting profile MX

Solid carbide rotary burrs, type RBF, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/RBF
T1302MY
Solid carbide rotary burrs, type RBF, cutting profile MY

Solid carbide rotary burrs, type RBF, cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/RBF
722461
Bi-metal band saw blades, Profile series, V-POS

Bi-metal band saw blades, Profile series, V-POS

  • High speed steel bi-metal HSS-M42
722910
Metal slitting saws, type H

Metal slitting saws, type H

  • High-speed steel HSS
  • DIN 1837
722913
Metal slitting saws, type N

Metal slitting saws, type N

  • High-speed steel HSS
  • DIN 1838
VN10030
Parallel shank twist drills - jobber series, type W

Parallel shank twist drills - jobber series, type W

  • High-speed steel HSS
  • DIN 338
VN10045
Parallel shank twist drills - jobber series, type T100

Parallel shank twist drills - jobber series, type T100

  • High-speed steel HSS Co5
  • DIN 338
VN10920
RS drill, for general purpose, type WN

RS drill, for general purpose, type WN

  • High-speed steel HSS
  • DIN 338
VN20045
Parallel shank twist drills, long series, type T100

Parallel shank twist drills, long series, type T100

  • High-speed steel HSS Co5
  • DIN 340
VN51105
NC-spotting drills 90° long

NC-spotting drills 90° long

  • High-speed steel HSS Co5
VN10010 TIN SET
Set of parallel shank twist drills - jobber series, TiN coating

Set of parallel shank twist drills - jobber series, TiN coating

  • High-speed steel HSS
  • DIN 338
S10132 ZrN
Solid carbide drills with coolant holes, 5xD, type W, coating ZrN

Solid carbide drills with coolant holes, 5xD, type W, coating ZrN

  • Solid carbide (SC)
VK10010 SET
Set of tapper shank drills, jobber series, diameter 14,5-30 mm, pasivation, 9 pcs

Set of tapper shank drills, jobber series, diameter 14,5-30 mm, pasivation, 9 pcs

  • High-speed steel HSS
  • DIN 345
VK10015 SET
Set of tapper shank drills, jobber series, diameter 14,5-30 mm, 9 pcs

Set of tapper shank drills, jobber series, diameter 14,5-30 mm, 9 pcs

  • High-speed steel HSS Co5
  • DIN 345
VN10010 SET
Set of parallel shank twist drills - jobber series

Set of parallel shank twist drills - jobber series

  • High-speed steel HSS
  • DIN 338
VN10015 TiN
Straight shank twist drills, jobbers series, 5xD, coating TIN

Straight shank twist drills, jobbers series, 5xD, coating TIN

  • High-speed steel HSS-Co5
  • DIN 338
VN10085 SET
Set of parallel shank twist drills - jobber series, type Ti

Set of parallel shank twist drills - jobber series, type Ti

  • High-speed steel HSS Co5
  • DIN 338
VN10920 SET
Set of RS drill, for general purpose, type WN

Set of RS drill, for general purpose, type WN

  • High-speed steel HSS
  • DIN 338
VN50105 TiN
NC-spotting drills 90°, coating TiN

NC-spotting drills 90°, coating TiN

  • High-speed steel HSS Co5
VN10085 TiAlN
Straight shank twist drills, jobbers series, 5xD, type Ti, coating TiAlN

Straight shank twist drills, jobbers series, 5xD, type Ti, coating TiAlN

  • High-speed steel HSS-Co5
  • DIN 338
S10012 TiAlN
Straight shank twist drills, jobbers series, 5xD, coating TiAlN

Straight shank twist drills, jobbers series, 5xD, coating TiAlN

  • Solid carbide (SC)
  • DIN 6537L
S70112 AlTiN
Extra long twist drills with inner cooling, 15xD, coating AlTiN

Extra long twist drills with inner cooling, 15xD, coating AlTiN

  • Solid carbide (SC)
S80112 AlTiN
Extra long twist drills with inner cooling, 20xD, coating AlTiN

Extra long twist drills with inner cooling, 20xD, coating AlTiN

  • Solid carbide (SC)
S90112 AlTiN
Extra long twist drills with inner cooling, 25xD, coating AlTiN

Extra long twist drills with inner cooling, 25xD, coating AlTiN

  • Solid carbide (SC)
S10122
Solid carbide drills with coolant holes, 5xD, coating AlTiN

Solid carbide drills with coolant holes, 5xD, coating AlTiN

  • Solid carbide (SC)
  • DIN 6537L
C10012
Solid carbide drills, 5xD

Solid carbide drills, 5xD

  • Solid carbide (SC)
C30012
Solid carbide drills, 3xD

Solid carbide drills, 3xD

  • Solid carbide (SC)
S16012
Mini drills

Mini drills

  • Solid carbide (SC)
  • DIN 1899
S50102
Solid carbide NC-spotting drills 90°

Solid carbide NC-spotting drills 90°

  • Solid carbide (SC)
S50112
Solid carbide NC-spotting drills 120°

Solid carbide NC-spotting drills 120°

  • Solid carbide (SC)
VK10010
Tapper shank drills, jobber series, pasivation

Tapper shank drills, jobber series, pasivation

  • High-speed steel HSS
  • DIN 345
VK10015
Tapper shank drills, jobber series

Tapper shank drills, jobber series

  • High-speed steel HSS Co5
  • DIN 345
VK10028
Tapper shank drills for hard machined materials, pasivation

Tapper shank drills for hard machined materials, pasivation

  • High-speed steel HSS Co8
VK60010
Tapper shank drills, extra long series

Tapper shank drills, extra long series

  • High-speed steel HSS
  • DIN 341
VK60045
Tapper shank drills, extra long series, type T100

Tapper shank drills, extra long series, type T100

  • High-speed steel HSS Co5
  • DIN 341
VK70010
Tapper shank drills, extra long series

Tapper shank drills, extra long series

  • High-speed steel HSS
  • DIN 1870
VK70045
Tapper shank drills, extra long series, type T100

Tapper shank drills, extra long series, type T100

  • High-speed steel HSS Co5
  • DIN 1870
VK80010
Tapper shank drills, extra long series

Tapper shank drills, extra long series

  • High-speed steel HSS
  • DIN 1870
VN10010
Parallel shank twist drills - jobber series

Parallel shank twist drills - jobber series

  • High-speed steel HSS
  • DIN 338
VN10015
Parallel shank twist drills - jobber series

Parallel shank twist drills - jobber series

  • High-speed steel HSS Co5
  • DIN 338
VN10018
Parallel shank twist drills, jobber series

Parallel shank twist drills, jobber series

  • High-speed steel HSS Co8
  • DIN 338
VN10085
Parallel shank twist drills - jobber series, type Ti

Parallel shank twist drills - jobber series, type Ti

  • High-speed steel HSS Co5
  • DIN 338
VN20010
Parallel shank twist drills, long series

Parallel shank twist drills, long series

  • High-speed steel HSS
  • DIN 340
VN20015
Parallel shank twist drills, long series

Parallel shank twist drills, long series

  • High-speed steel HSS Co5
  • DIN 340
VN30010
Parallel shank twist drills, stub series

Parallel shank twist drills, stub series

  • High-speed steel HSS
  • DIN 1897
VN30045
Parallel shank twist drills, stub series, type V120

Parallel shank twist drills, stub series, type V120

  • High-speed steel HSS Co5
  • DIN 1897
VN30225
Twist drills for welding spots

Twist drills for welding spots

  • High-speed steel HSS Co5
VN40090
Double ended body drills

Double ended body drills

  • High-speed steel HSS
VN40225
Double ended twist drills for welding spots

Double ended twist drills for welding spots

  • High-speed steel HSS
VN50105
NC-spotting drills 90°

NC-spotting drills 90°

  • High-speed steel HSS Co5
VN50115
NC-spotting drills 120°

NC-spotting drills 120°

  • High-speed steel HSS Co5
VN51115
NC-spotting drills 120° long

NC-spotting drills 120° long

  • High-speed steel HSS Co5
VN60010
Parallel shank twist drills, extra long series

Parallel shank twist drills, extra long series

  • High-speed steel HSS
  • DIN 1869
VN60045
Parallel shank twist drills, extra long series,type T100

Parallel shank twist drills, extra long series,type T100

  • High-speed steel HSS Co5
  • DIN 1869
VN70010
Parallel shank twist drills, extra long series

Parallel shank twist drills, extra long series

  • High-speed steel HSS
  • DIN 1869
VN70045
Parallel shank twist drills, extra long series,type T100

Parallel shank twist drills, extra long series,type T100

  • High-speed steel HSS Co5
  • DIN 1869
VN80010
Parallel shank twist drills, extra long series

Parallel shank twist drills, extra long series

  • High-speed steel HSS
  • DIN 1869
VN80045
Parallel shank twist drills, extra long series,type T100

Parallel shank twist drills, extra long series,type T100

  • High-speed steel HSS Co5
  • DIN 1869
VS92010
Centre drills 60°, form A

Centre drills 60°, form A

  • High-speed steel HSS
  • DIN 333A
VS92012
Centre drills SC 60° form A

Centre drills SC 60° form A

  • Solid carbide (SC)
VS92015
Centre drills 60°, form A

Centre drills 60°, form A

  • High-speed steel HSS Co5
  • DIN 333A
VS92115
Centre drills 60° long, form A

Centre drills 60° long, form A

  • High-speed steel HSS Co5
  • DIN 333A
VS93010
Centre drills 60°, form R

Centre drills 60°, form R

  • High-speed steel HSS
  • DIN 333R
VS94010
Stepped drills

Stepped drills

  • High-speed steel HSS
VS94015
Stepped drills

Stepped drills

  • High-speed steel HSS Co5
VN10010 TIN
Parallel shank twist drills - jobber series, coating TiN

Parallel shank twist drills - jobber series, coating TiN

  • High-speed steel HSS
  • DIN 338
VN50115 TiN
NC-spotting drills 120°, coating TiN

NC-spotting drills 120°, coating TiN

  • High-speed steel HSS Co5
S10222 AlTiN
Solid carbide drills with coolant holes, 5xD, coating AlTiN

Solid carbide drills with coolant holes, 5xD, coating AlTiN

  • Solid carbide (SC)
  • DIN 6537L
S20122 TiAlN
Solid carbide drills with coolant holes, 8xD, coating AlTiN

Solid carbide drills with coolant holes, 8xD, coating AlTiN

  • Solid carbide (SC)
S30112 TiAlN
Solid carbide drills, 3xD, coating TiAlN

Solid carbide drills, 3xD, coating TiAlN

  • Solid carbide (SC)
  • DIN 6537K
S50102 AlTiN
Solid carbide drills, AlTiN

Solid carbide drills, AlTiN

  • Solid carbide (SC)
S60122 TiAlN
Solid carbide drills with coolant holes, 12xD

Solid carbide drills with coolant holes, 12xD

  • Solid carbide (SC)
CS21005
Machine countersinks, Pro series

Machine countersinks, Pro series

  • High-speed steel HSS-Co5
  • DIN 335C
CS21005 SET
Set of machine countersinks, Pro series

Set of machine countersinks, Pro series

  • High-speed steel HSS-Co5
  • DIN 335C
CS21002 TiAlN
Countersinks, Basic series, coating TiAlN

Countersinks, Basic series, coating TiAlN

  • Solid carbide (SC)
CS21005 TiAlN
Machine countersinks, Pro series, coating TiAlN

Machine countersinks, Pro series, coating TiAlN

  • High-speed steel HSS-Co5
  • DIN 335C
CS11305
Counterbores with fixed pilot, 180°

Counterbores with fixed pilot, 180°

  • High-speed steel HSS Co5
  • DIN 373
CS15305
Counterbores with fixed pilot, 90°

Counterbores with fixed pilot, 90°

  • High-speed steel HSS Co5
  • DIN 1866
CS25205
Countersinks 90°

Countersinks 90°

  • High-speed steel HSS Co5
  • DIN 335C
MT11305 SET
Set of machine taps

Set of machine taps

  • High-speed steel HSS-Co5
  • DIN 371, DIN 376
MT11384 SET
Set of machine taps, universal, coating TiCN

Set of machine taps, universal, coating TiCN

  • High-speed steel HSSE-V3
  • DIN 371, DIN 376
MT21505 SET
Set of machine taps, λ 40°

Set of machine taps, λ 40°

  • High-speed steel HSS-Co5
  • DIN 371, DIN 376
MT21584 SET
Set of machine taps, universal, λ 40°, coating TiCN

Set of machine taps, universal, λ 40°, coating TiCN

  • High-speed steel HSSE-V3
  • DIN 371, DIN 376
VS95015
Centre drills for threads, form DA

Centre drills for threads, form DA

  • High-speed steel HSS Co5
  • DIN 332/2
CD71090
Circular dies

Circular dies

  • High-speed steel HSS
  • DIN EN 22 568
CD72090
Circular dies, fine metric thread

Circular dies, fine metric thread

  • High-speed steel HSS
  • DIN EN 22 568
CD81075
Circular dies, for stainless steel

Circular dies, for stainless steel

  • High-speed steel HSS Co5
  • DIN EN 22 568
CD82075
Circular dies, for stainless steel, fine metric thread

Circular dies, for stainless steel, fine metric thread

  • High-speed steel HSS Co5
  • DIN EN 22 568
MT11305
Machine taps with straight flute, pasivation

Machine taps with straight flute, pasivation

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT11375
Machine taps with straight flute, pasivation

Machine taps with straight flute, pasivation

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT12305
Machine taps with straight flute, fine metric thread

Machine taps with straight flute, fine metric thread

  • High-speed steel HSS Co5
  • DIN 374
MT21505
Machine taps with spiral flute, 40°, pasivation

Machine taps with spiral flute, 40°, pasivation

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT21575
Machine taps with spiral flute, 35°, pasivation

Machine taps with spiral flute, 35°, pasivation

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT22505
Machine taps with spiral flute 40°, fine metric thread

Machine taps with spiral flute 40°, fine metric thread

  • High-speed steel HSS Co5
  • DIN 374
MT11375 TICN
Machine taps with straight flute, for stainless steel, coating TiCN

Machine taps with straight flute, for stainless steel, coating TiCN

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT11384 TICN
Machine taps with straight flute, universal, coating TiCN

Machine taps with straight flute, universal, coating TiCN

  • High-speed steel HSSE V3
  • DIN 371, DIN 376
MT21575 TICN
Machine taps with spiral flute, 35°, for stainless steel, coating TiCN

Machine taps with spiral flute, 35°, for stainless steel, coating TiCN

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT21584 TICN
Machine taps with spiral flute, 40°, universal, coating TiCN

Machine taps with spiral flute, 40°, universal, coating TiCN

  • High-speed steel HSSE V3
  • DIN 371, DIN 376
2024 © ZPS-FN a.s. | All right reserved
webdesign by Studio 9