End mills long, fine teeth, 45°, typ H, plain shank, code S131602, diameter 14 mm

Home
Catalogue
SC milling cutters
End mills long, fine teeth, 45°, typ H, plain shank, code S131602, diameter 14 mm

S131602.140 AlTiN Solid carbide (SC) DIN 6527L

Cutting conditions Product attributes

D h 10	d h 6	l₁	l₂	Z	Item code	On stock
14	14	83	26	6	S131602.140 AlTiN	Yes

Cutting conditions

Material	Strength	A_p	A_e	V_c	fz(mm/z) Ø 6	Ø 8	Ø 10	Ø 12	Ø 16	Ø 18	Ø 20
P.1 \| Free-cutting steels, general construction steels	≤ 600 N/mm²	1,75xD	0,05xD	180	0.03	0.04	0.05	0.06	0.08	0.09	0.1
P.3 \| Tool steels low alloyed	≤ 1100 N/mm²	1,75xD	0,05xD	100	0.03	0.04	0.05	0.06	0.08	0.09	0.1
P.5 \| Tool steels high alloyed	≤ 1100 N/mm²	1,75xD	0,05xD	80	0.03	0.04	0.05	0.06	0.08	0.09	0.1
M.1 \| Corrosion- and acid-proof steels	≤ 750 N/mm²	1,75xD	0,05xD	90	0.03	0.04	0.05	0.06	0.08	0.09	0.1
M.2 \| Corrosion- and acid-proof steels	750 - 850 N/mm²	1,75xD	0,05xD	80	0.03	0.04	0.05	0.06	0.08	0.09	0.1
K.1 \| Cast iron (≤ 240 HB)	≤ 820 N/mm²	1,75xD	0,05xD	140	0.03	0.04	0.05	0.06	0.08	0.09	0.1
K.2 \| Cast iron (> 240 HB)	> 800 N/mm²	1,75xD	0,05xD	100	0.03	0.04	0.05	0.06	0.08	0.09	0.1
S.1 \| Chrome-nickel alloys	≤ 1500 N/mm²	1,75xD	0,05xD	50	0.03	0.04	0.05	0.06	0.08	0.09	0.1
S.2 \| Titanium, titanium alloys	≤ 1250 N/mm²	1,75xD	0,05xD	70	0.03	0.04	0.05	0.06	0.08	0.09	0.1
H.1 \| Hardened materials (< 54 HRC)	≤ 1920 N/mm²	1,75xD	0,05xD	80	0.03	0.04	0.05	0.06	0.08	0.09	0.1

Calculations of cutting conditions

Product attributes

Clamping element

more +

Plain straight shank according to DIN 6535 HA.

Tool geometry

more +

Helix angle = 45°. Rake angle = 12°.

End face design

Solid carbide

more +

Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.

Type H

more +

Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.

Feed direction possibility

Oil coolant.

Coating AlTiN

more +

Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.