Side and face milling cutters, fine teeth, type H
|
D
js 16 |
S
k 11 |
d
H 7 | Z | Item code | On stock |
|---|---|---|---|---|---|
| 50 | 4 | 16 | 16 | 730275.05004 | Yes |
| 50 | 5 | 16 | 16 | 730275.05005 | Yes |
| 50 | 6 | 16 | 16 | 730275.05006 | Yes |
| 50 | 8 | 16 | 16 | 730275.05008 | Yes |
| 50 | 10 | 16 | 16 | 730275.05010 | Yes |
| 63 | 4 | 22 | 18 | 730275.06304 | Yes |
| 63 | 5 | 22 | 18 | 730275.06305 | Yes |
| 63 | 6 | 22 | 18 | 730275.06306 | Yes |
| 63 | 8 | 22 | 18 | 730275.06308 | No |
| 63 | 10 | 22 | 18 | 730275.06310 | No |
| 63 | 12 | 22 | 18 | 730275.06312 | Yes |
| 63 | 14 | 22 | 18 | 730275.06314 | Yes |
| 63 | 16 | 22 | 18 | 730275.06316 | Yes |
| 80 | 4 | 27 | 20 | 730275.08004 | No |
| 80 | 5 | 27 | 20 | 730275.08005 | Yes |
| 80 | 6 | 27 | 20 | 730275.08006 | Yes |
| 80 | 8 | 27 | 20 | 730275.08008 | Yes |
| 80 | 10 | 27 | 18 | 730275.08010 | No |
| 80 | 12 | 27 | 18 | 730275.08012 | Yes |
| 80 | 14 | 27 | 18 | 730275.08014 | Yes |
| 80 | 16 | 27 | 18 | 730275.08016 | Yes |
| 80 | 18 | 27 | 18 | 730275.08018 | Yes |
| 80 | 20 | 27 | 18 | 730275.08020 | No |
| 100 | 3 | 32 | 20 | 730275.10003 | Yes |
| 100 | 4 | 32 | 20 | 730275.10004 | No |
| 100 | 5 | 32 | 20 | 730275.10005 | Yes |
| 100 | 6 | 32 | 20 | 730275.10006 | Yes |
| 100 | 8 | 32 | 20 | 730275.10008 | Yes |
| 100 | 10 | 32 | 20 | 730275.10010 | Yes |
| 100 | 12 | 32 | 20 | 730275.10012 | Yes |
| 100 | 14 | 32 | 20 | 730275.10014 | Yes |
| 100 | 16 | 32 | 20 | 730275.10016 | Yes |
| 100 | 18 | 32 | 20 | 730275.10018 | Yes |
| 100 | 20 | 32 | 20 | 730275.10020 | Yes |
| 100 | 25 | 32 | 20 | 730275.10025 | Yes |
| 125 | 5 | 32 | 24 | 730275.12505 | No |
| 125 | 6 | 32 | 24 | 730275.12506 | Yes |
| 125 | 8 | 32 | 24 | 730275.12508 | No |
| 125 | 10 | 32 | 22 | 730275.12510 | No |
| 125 | 12 | 32 | 22 | 730275.12512 | Yes |
| 125 | 14 | 32 | 22 | 730275.12514 | Yes |
| 125 | 16 | 32 | 22 | 730275.12516 | Yes |
| 125 | 18 | 32 | 22 | 730275.12518 | Yes |
| 125 | 20 | 32 | 22 | 730275.12520 | Yes |
| 125 | 25 | 32 | 22 | 730275.12525 | Yes |
| 125 | 28 | 32 | 22 | 730275.12528 | Yes |
| 160 | 6 | 40 | 26 | 730275.16006 | Yes |
| 160 | 8 | 40 | 26 | 730275.16008 | Yes |
| 160 | 10 | 40 | 26 | 730275.16010 | Yes |
| 160 | 12 | 40 | 26 | 730275.16012 | Yes |
| 160 | 14 | 40 | 26 | 730275.16014 | Yes |
| 160 | 16 | 40 | 26 | 730275.16016 | Yes |
| 160 | 18 | 40 | 26 | 730275.16018 | Yes |
| 160 | 20 | 40 | 26 | 730275.16020 | Yes |
| 160 | 25 | 40 | 26 | 730275.16025 | Yes |
| 160 | 32 | 40 | 26 | 730275.16032 | Yes |
| 200 | 8 | 40 | 32 | 730275.20008 | Yes |
| 200 | 10 | 40 | 32 | 730275.20010 | Yes |
| 200 | 12 | 40 | 32 | 730275.20012 | Yes |
| 200 | 14 | 40 | 32 | 730275.20014 | Yes |
| 200 | 16 | 40 | 32 | 730275.20016 | Yes |
| 200 | 18 | 40 | 32 | 730275.20018 | Yes |
| 200 | 20 | 40 | 32 | 730275.20020 | Yes |
| 200 | 25 | 40 | 32 | 730275.20025 | Yes |
| 200 | 32 | 40 | 32 | 730275.20032 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 50 |
Ø 63 |
Ø 80 |
Ø 100 |
Ø 125 |
Ø 160 |
Ø 200 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 0,1xD | 1xS | 37.5 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
| P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 0,1xD | 1xS | 32.5 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
| P.4 | Heat treatable steels | ≤ 900 N/mm² | 0,1xD | 1xS | 25 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
| P.5 | Tool steels high alloyed | ≤ 1100 N/mm² | 0,1xD | 1xS | 18 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
| M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 0,1xD | 1xS | 10 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
| K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² | 0,1xD | 1xS | 30 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
| K.2 | Cast iron (> 240 HB) | > 800 N/mm² | 0,1xD | 1xS | 22 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
| N.4 | Cooper-zinc alloys, cooper-tin alloys | ≤ 800 N/mm² | 0,1xD | 1xS | 60-100 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
Calculations of cutting conditions
Product attributes
Straight bore with standard keyway according to DIN 138.
Helix angle = 10°.
Rake angle = 8°.
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.
