Side and face milling cutters, semicoarse teeth, type N
|
D
js 16 |
S
k 11 |
d
H 7 | Z | Item code | On stock |
|---|---|---|---|---|---|
| 50 | 3 | 16 | 12 | 720275.05003 | Yes |
| 50 | 4 | 16 | 12 | 720275.05004 | Yes |
| 50 | 5 | 16 | 12 | 720275.05005 | Yes |
| 50 | 6 | 16 | 12 | 720275.05006 | Yes |
| 50 | 8 | 16 | 12 | 720275.05008 | Yes |
| 50 | 10 | 16 | 12 | 720275.05010 | Yes |
| 63 | 3 | 22 | 12 | 720275.06303 | Yes |
| 63 | 4 | 22 | 12 | 720275.06304 | Yes |
| 63 | 5 | 22 | 12 | 720275.06305 | Yes |
| 63 | 6 | 22 | 12 | 720275.06306 | No |
| 63 | 8 | 22 | 12 | 720275.06308 | Yes |
| 63 | 10 | 22 | 12 | 720275.06310 | Yes |
| 63 | 12 | 22 | 12 | 720275.06312 | Yes |
| 63 | 14 | 22 | 12 | 720275.06314 | Yes |
| 63 | 16 | 22 | 12 | 720275.06316 | Yes |
| 63 | 18 | 22 | 12 | 720275.06318 | Yes |
| 80 | 3 | 27 | 14 | 720275.08003 | Yes |
| 80 | 4 | 27 | 14 | 720275.08004 | Yes |
| 80 | 5 | 27 | 14 | 720275.08005 | Yes |
| 80 | 6 | 27 | 14 | 720275.08006 | Yes |
| 80 | 8 | 27 | 14 | 720275.08008 | No |
| 80 | 10 | 27 | 14 | 720275.08010 | Yes |
| 80 | 12 | 27 | 14 | 720275.08012 | Yes |
| 80 | 14 | 27 | 14 | 720275.08014 | Yes |
| 80 | 16 | 27 | 14 | 720275.08016 | No |
| 80 | 18 | 27 | 14 | 720275.08018 | Yes |
| 80 | 20 | 27 | 14 | 720275.08020 | Yes |
| 100 | 3 | 32 | 14 | 720275.10003 | Yes |
| 100 | 4 | 32 | 14 | 720275.10004 | Yes |
| 100 | 5 | 32 | 14 | 720275.10005 | Yes |
| 100 | 6 | 32 | 14 | 720275.10006 | No |
| 100 | 8 | 32 | 14 | 720275.10008 | Yes |
| 100 | 10 | 32 | 14 | 720275.10010 | Yes |
| 100 | 12 | 32 | 14 | 720275.10012 | Yes |
| 100 | 14 | 32 | 14 | 720275.10014 | Yes |
| 100 | 16 | 32 | 14 | 720275.10016 | Yes |
| 100 | 18 | 32 | 14 | 720275.10018 | Yes |
| 100 | 20 | 32 | 14 | 720275.10020 | Yes |
| 100 | 22 | 32 | 14 | 720275.10022 | Yes |
| 100 | 25 | 32 | 14 | 720275.10025 | Yes |
| 125 | 4 | 32 | 16 | 720275.12504 | Yes |
| 125 | 5 | 32 | 16 | 720275.12505 | Yes |
| 125 | 6 | 32 | 16 | 720275.12506 | Yes |
| 125 | 8 | 32 | 16 | 720275.12508 | Yes |
| 125 | 10 | 32 | 16 | 720275.12510 | Yes |
| 125 | 12 | 32 | 16 | 720275.12512 | Yes |
| 125 | 14 | 32 | 16 | 720275.12514 | Yes |
| 125 | 16 | 32 | 16 | 720275.12516 | No |
| 125 | 18 | 32 | 16 | 720275.12518 | Yes |
| 125 | 20 | 32 | 16 | 720275.12520 | Yes |
| 125 | 22 | 32 | 16 | 720275.12522 | Yes |
| 125 | 25 | 32 | 16 | 720275.12525 | Yes |
| 125 | 28 | 32 | 16 | 720275.12528 | Yes |
| 160 | 6 | 40 | 18 | 720275.16006 | Yes |
| 160 | 8 | 40 | 18 | 720275.16008 | No |
| 160 | 10 | 40 | 18 | 720275.16010 | Yes |
| 160 | 12 | 40 | 18 | 720275.16012 | Yes |
| 160 | 14 | 40 | 18 | 720275.16014 | Yes |
| 160 | 16 | 40 | 18 | 720275.16016 | Yes |
| 160 | 18 | 40 | 18 | 720275.16018 | Yes |
| 160 | 20 | 40 | 18 | 720275.16020 | Yes |
| 160 | 25 | 40 | 18 | 720275.16025 | Yes |
| 160 | 32 | 40 | 18 | 720275.16032 | Yes |
| 200 | 8 | 40 | 24 | 720275.20008 | Yes |
| 200 | 10 | 40 | 24 | 720275.20010 | Yes |
| 200 | 12 | 40 | 24 | 720275.20012 | Yes |
| 200 | 14 | 40 | 24 | 720275.20014 | Yes |
| 200 | 16 | 40 | 24 | 720275.20016 | Yes |
| 200 | 18 | 40 | 24 | 720275.20018 | Yes |
| 200 | 20 | 40 | 24 | 720275.20020 | Yes |
| 200 | 25 | 40 | 24 | 720275.20025 | Yes |
| 200 | 32 | 40 | 24 | 720275.20032 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 50 |
Ø 63 |
Ø 80 |
Ø 100 |
Ø 125 |
Ø 160 |
Ø 200 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 0,1xD | 1xS | 37.5 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
| P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 0,1xD | 1xS | 32.5 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
| K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm | 0,1xD | 1xS | 30 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
| N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 0,1xD | 1xS | 160-260 | 0.035 | 0.042 | 0.049 | 0.056 | 0.063 | 0.0644 | 0.0665 |
| N.4 | Cooper-zinc alloys, cooper-tin alloys | ≤ 800 N/mm² | 0,1xD | 1xS | 60-100 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.092 | 0.095 |
Calculations of cutting conditions
Product attributes
Straight bore with standard keyway according to DIN 138.
Helix angle = 10°.
Rake angle = 12°.
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Universal usage. Suitable for materials up to strength 900 MPa.
